Table of Contents
Advertisement
Section 2
2 -TECHNICAL DATA
2.1 - Plate data
The plate bearing the equipment specifications should
be applied on the outside rear part of the machine and/
or on the electrical panels. Any preparation of machines
only for relocation of the condensing units must follow
the regulations enforced in the country of installation
regarding fire safety (refer to the command of the local
fire department for the relevent indications). It should
also be considered that the possible intervention of safety
valves or fusible plugs, located in the refrigerant circuit,
entail the immediate discharge of all the refrigerant into
the environment.
The appliance's climate class is stated on the serial plate
2.2 - Refrigerant
The appliance contains flourinated greenhouose gases
covered by the Kyoto Protocol in the quantities indecated
on the serial plate. The type of refrigerant gas present in
the refrigerant circuit of the appliance is shown on the
serial plate. The GWP (global warming protential) of the
HFC R134a gas is 1430 and the HFCR404A gas is at 3922.
The CO2 equivalent data is shown on the serial plate.
According to regulation (EC) 1272/2008,
,
R134a and R404A gases are non-flammable
and non-toxic. in high concentrations they
cause burns and frostbite. in the system the
gas is pressurised; it may explode if heated.
Part Number: 9294045 07/19
,
Technical Information
5
Hide quick links:
Advertisement
Table of Contents
