Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for luxvision ET-185
Summary of Contents for luxvision ET-185
- Page 2 Preface Thank you for purchasing our ET-185 motorized instrument table. Please read this manual carefully for the sake of your best use. General Requirements for Safety Please read carefully about following precautions to avoid unexpected personal injury as well as the product being damaged and other possible dangers.
- Page 3 ：1pc. 2 ASSEMBLY PROCEDURES This section of the manual describes how to assemble ET-185 instrument table. All parts should be taken with great care out of the packing case before assembly. ! Screw off two M10 screws and spring washers at the side of the base.
- Page 4 have lock towards the up and down switch. ! Aim the two holes on the caster to the screw cap at the side of the base and insert. ! Put the instrument table on the flat ground. ! Screw the M10 screws with spring washers in the screw hole on the base through the hole on the foot frame, and fasten with hexagonal wrench.
-
Page 5: Specifications
! Clean the plastic parts such as chin-rest bracket, forehead-rest belt with soft cloth dipped with soluble detergent or water, sterilize with medicinal alcohol. Replacing the fuse ! Turn off the main power switch and pull out the power plug from the power socket. ! Screw off the fuse holder cover with the screw driver.
Need help?
Do you have a question about the ET-185 and is the answer not in the manual?
Questions and answers