Stubble Styler:
The Stubble Styler comb is designed to help you maintain a 3-day stubble
look. Please be aware that you cannot shave a full long beard down to
stubble length with the stubble styler.
To achieve the look:
•
Clean shave your face initially and then let your beard grow for two or
three days.
•
Attach the stubble styler to the cutting head of the shaver.
•
Shave your face with short, linear motions. The stubble guard will only
trim hairs that are over 1.5 mm in length.
•
Shave with the stubble styler at least every two days to maintain the
length and do not allow hairs to get too long.
•
Detach the stubble styler if you wish to have a clean shave look on
your neck or other areas of your face where you do not want stubble
showing.
Tips: Faster growing areas of your beard will begin to be trimmed first.
Slower growing areas of your beard will fill in over a period of a few days or
weeks.
CLEANING & MAINTENANCE
The shaver is a wet/dry appliance. The shaver may be cleaned under warm
water.
Note: When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power cord.
Caution:
When cleaning the external surfaces of the shaver, use a damp cloth. Do
not use strong detergents or other chemicals.
To dry, wipe the surface of the shaver with a dry towel. Do not use a hair
dryer or heater to dry the shaver.
Note: Lubricate cutters after rinsing with Remington Shaver Saver (SP4).
Cleaning Your Shaver
Note: We recommend following these steps after each use.
L
M
12
N