Related Manuals for Zonefirst BPE
Summary of Contents for Zonefirst BPE
- Page 1 ™ By-Pass Eliminator Model BPE For use with Plug-In Damper Motors and Control Panels Only Installation and Operating Instructions Controlling Your Comfort Room by Room F o l l o w u s o n...
-
Page 2: Installation
NOT on the furnace or plenum where it will be in contact with the high heating temperatures. The The BPE uses an air sensor in the duct system on the supply panel can be located in an attic space or in an enclosed... -
Page 3: Operation
OPERATION important thing to note is that if the sensor is calibrated with The BPE controls up to 4 zones on a single HVAC unit and the HVAC unit running or in a windy environment it can lead up to 10 dampers per zone on the output terminals. When to a bad calibration measurement. -
Page 4: Motor Plug
NOT USED NOT USED NOT USED -12VDC -12VDC -12VDC -12VDC POSITIVE (+) POSITIVE (+) POSITIVE (+) NEGATIVE (-) NEGATIVE (-) NEGATIVE (-) POSITIVE (+) POSITIVE (+) POSITIVE (+) NOT USED NOT USED NOT USED BPE Installation Instructions #BPE20651508 © 2015 ZONEFIRST... - Page 5 BPE Installation Instructions #BPE20651508 © 2015 ZONEFIRST...
Need help?
Do you have a question about the BPE and is the answer not in the manual?
Questions and answers