To Charge The Battery - Sony Ericsson Z525a User Manual

Cingular
Hide thumbs Also See for Z525a:
Table of Contents

Advertisement

Getting started

To charge the battery

It may take up to 30 minutes before the battery icon
appears when charging.
≈ 4 h.
1
Connect the charger to the phone. The symbol
on the charger plug must face upwards.
2
It may take up to 30 minutes before the battery
icon appears on the screen.
3
Wait approximately 4 hours or until the battery
icon indicates that the battery is fully charged.
If you do not see the battery icon after this
time, press a key to activate the screen.
4
Remove the charger by pulling it straight out.
6
This is the Internet version of the user's guide. © Print only for private use.
≈ 30 min.
Some functions use more battery power than others
and may cause a need for more frequent re-charging.
However, talk-time or standby time may become
noticeably shorter due to wear and you may have to
replace your battery. Only use approved batteries
%
from Sony Ericsson
88 Battery
PIN (Personal Identity Number)
You may need a PIN (Personal Identity Number)
to activate the services in your phone. The PIN is
associated with your SmartChip, and not with the
phone. Your PIN is provided by your network
operator. When you enter your PIN, each digit
appears as *, unless your PIN starts with the same
digits as an emergency number, for example 112
or 911. This is so that you can see and call an
emergency number without entering a PIN.
If you make a mistake while entering your PIN,
delete the number by pressing
If you enter the wrong PIN three times in a row, the
SmartChip is blocked and the message PIN blocked
appears. To unblock it, you need to enter your PUK
(Personal Unblocking Key),
.
.
%
.
77 SmartChip lock

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z525Z525a z525a z525a

Table of Contents