To Charge The Battery - Sony Ericsson W300i User Manual

To insert the SmartChip
1
Slide the cover open and lift it off.
2
Insert the SmartChip. Make sure the
SmartChip is placed under the silvery holders.
3
Place the battery in the phone with the label
side up and the connectors facing each other.
4
Place the cover on the phone and slide it into
place.
This is the Internet version of the user's guide. © Print only for private use.

To charge the battery

1
Connect the charger to the phone. The flash
symbol on the charger plug must face upwards.
2
It may take 30 minutes for the battery icon
to appear.
3
Wait approximately 2.5 hours or until the
battery icon indicates that the battery is fully
charged. For an indication of charging, press
to activate the screen.
4
Remove the charger by pulling it out.
Getting Started
5