Memory Function - Levoit LV-PUR131 Owner's Manual

O P E R AT I O N ( c o n t . )
Auto Button
Turns on or turns off the automatic sensor
inside the air purifier. This automatic
mode (Auto Mode) adjusts the fan speed
of the air purifier according to the current
air quality to provide clean air for your
living space. The air quality indicator will
also illuminate on the LED display. The
table below shows the different colors of
the air quality indicator in correlation to
both air quality & fan speed. [Chart A]
Color Air Quality
Red Bad
Yellow Moderate
Green Good
Blue Very Good
NOTE:
• It will take 1 minute for the dust sensor to detect the air quality each
time Auto Mode is turned on. After 1 minute, the color of the air
quality indicator will change based on the detected air quality.
• You can also tap '
10
Chart A
Fan Speed
High
Medium
Low
Sleep Mode
' or ' ' to turn off the automatic sensor.
Timer Button
Allows you to program a timer anywhere
from 1 to 12 hours.
1. Tap '
time.
2. Once you have reached the desired
time, the display will flash three times
before setting.
3. The air purifier will automatically
power off once the timer has finished
counting down.
4. To cancel the timer, tap '
repeatedly until the display reads
"-:--". Wait until "-:--" flashes three
times.

Memory Function

The air purifier will remember its programmed settings
when turned off, and will resume these settings when it is
turned back on. Please note that the air purifier must remain
plugged in for this memory function to work.
' repeatedly to choose a
'