Resetting The Air Purifier - Levoit LV-PUR131 Owner's Manual

NOTE:
• The filters cannot be cleaned manually.
• The back cover must be placed back on the unit in order for it to power on.
• Only use Levoit LV-PUR131-RF True HEPA Filters when changing the filters for this device.
• Scan the QR code to the right to purchase new air filters.

Resetting the Air Purifier

It is necessary to reset the air purifier after changing the air filters.
1. Plug in the air purifier and turn it on.
2. Locate the reset button vent on the side of the air
purifier. [Figure 3.1]
NOTE: When using the air purifier in a heavily polluted environment, the lifetime of the air filters may be significantly reduced and the filters
may stop filtering air properly. You can change the filters even if the change filter indicator does not light up. Follow the steps in the Replacing
the Air Filters section, then reset the air purifier.
Figure 3.1
3. Use a pen, pencil, or a small object to press the black
reset button inside the vent. [Figure 3.2]
4. The change filter indicator will disappear, indicating that
the reset is complete.
Figure 3.2
13