FujiFilm GFX 50R Owner's Manual page 9

Using Two Cards
The camera can be used with two cards, one in each of its two slots.
At default settings, photos are saved to the card in the second slot
only when the card in the fi rst slot is full. This can be changed using
D SAVE DATA SETTING > CARD SLOT SETTING (STILL IMAGE).
Option Option
The card in the second slot is used only when the card in
the fi rst slot is full. If the second slot is selected for D SAVE
SEQUENTIAL
DATA SETTING > SWITCH SLOT (SEQUENTIAL), re-
(default)
cording will start on the card in the second slot and switch to
the fi rst slot when the card in the second slot is full.
BACKUP Each picture is recorded twice, once to each card.
As for SEQUENTIAL, except that the RAW copy of pictures
taken with FINE + RAW or NORMAL + RAW selected for
H IMAGE QUALITY SETTING > IMAGE QUALITY will
RAW/JPEG
be saved to the card in the fi rst slot and the JPEG copy to the
card in the second slot.
The card used to store movies can be selected using D SAVE DATA
SETTING > MOVIE FILE DESTINATION.
Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have
been approved for use in the camera; UHS-II cards can be used in
both slots, while cards with a UHS speed class of 3 or better are
recommended for movies. A complete list of approved memory
cards is available at http://www.fujifilm.com/support/digital_cameras/
compatibility/. Operation is not guaranteed with other cards. The
camera can not be used with xD-Picture Cards or MultiMediaCard
(MMC) devices.
Description Description
Inserting Memory Cards
Display Display
9