10/25/2014
REMOVAL PROCEDURE
1. Remove the left bank secondary timing chain. Refer to Secondary Camshaft Drive Chain
Replacement - Left Side .
2. Remove the oil level indicator. Refer to Oil Level Indicator and Tube Replacement .
Fig 1: View Of Coolant Temperature Sensor And Electrical Connector
Courtesy of GENERAL MOTORS CORP.
3. Remove the heat shield from the coolant temperature sensor and disconnect the coolant
temperature sensor electrical connector.
http://www2.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms=true&ymms=false&className=
Printer Friendly View
44/51