Sony Trinitron KV-XG29 Operating Instructions Manual page 19

When receiving an A2 (German) program
Broadcasting
A2 (German) stereo
A2 (German) bilingual
Receiving area for NICAM and A2 (German) programs
System
NICAM
A2 (German)
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select
If the sound is distorted or noisy when receiving a monaural
program through the ˘ (antenna) terminal
Press A/B repeatedly until "MONO" appears on the screen.
To cancel the monaural sound setting, press A/B again until
"AUTO" appears on the screen.
Notes
• The "MONO" or "AUTO" setting is memorized for each program
• You cannot receive stereo broadcast signal when the TV is in the "MONO"
On-screen display (Selected sound)
Receiving area
Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.
Australia, Malaysia, Thailand, etc.
"MONO". The sound becomes monaural, but the noise is reduced.
MONO
position.
setting. Normally set the TV to "AUTO".
MONO
(Regular sound)
MAIN
(Main sound)
AUTO
Advanced Operations
STEREO
(Stereo sound)
SUB
(Sub sound)
19