Changing The Program Once Started; Adding Items While A Wash Is In Progress - Midea 340950 Installation Instructions & User Manual

Changing The Program Once Started

A wash program can only be changed if it has not been running long. You need to
ensure that the wash water is still present and it has not drained out and began
rinsing. Detergent will have to be re added if there is no wash water present.
Here are the instructions to change the program:
1. Press the Start/Pause button to pause the washing.
2. Press the Program button for more than 3 seconds, the program will be cancelled.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, the dishwasher will start.

Adding Items While A Wash Is In Progress

You can add items after the wash program has begun.
However if it is no longer in the wash cycle, anything added may not be well washed,
and other items soiled as well. Check that it is not rinsing.
Follow these instructions:
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the drawer.
3. Add the extra items.
4. Close the drawer.
5. Press the Start/Pause button, the dishwasher will start.
CAUTION
NOTE:
When the dishwasher is operating, do not force open the drawer, press the
Start/Pause button, and wait a few seconds before opening the drawer.
If the electric power to the dishwasher is interrupted during a wash program, it will
continue to the end of the program when the power is restored.
It is dangerous to open the drawer
mid-cycle, as hot steam may
scald you.
23