Hyundai Elantra Manual page 28

Convenient features of your vehicle
Automatic-Dimming Night Vision
®
Safety™ (NVS ) Mirror
(if equipped)
The NVS ® Mirror automatically
reduces glare by monitoring light lev-
els in the front and the rear of the
vehicle. Any object that obstructs
either light sensor will degrade the
automatic dimming control feature.
For more information regarding
®
NVS mirrors and other applica-
tions, please refer to the Gentex
website:
www.gentex.com
3-28
Your mirror will automatically dim
upon detecting glare from the vehi-
cles traveling behind you. The auto-
dimming function can be controlled
by pressing the Dimming ON/OFF
button:
1. Pressing and holding the
for 3 seconds turns the auto-dim-
ming function OFF which is indi-
cated by the green
Indicator LED turning off.
2. Pressing and holding the
for 3 seconds again turns the auto-
dimming function ON which is indi-
cated by the green Status Indicator
LED turning on.
The mirror defaults to the ON posi-
tion each time the vehicle is started.
Z-Nav™ Compass Display
The NVS™ Mirror in your vehicle is
also equipped with a Z-Nav™
Compass that shows the vehicle
Compass heading in the Display
Window using the 8 basic cardinal
headings (N, NE, E, SE, etc.).
Integrated HomeLink
Control System
The HomeLink ®
System can replace up to three
hand-held radio-frequency
transmitters with a single built-in
device. This innovative feature will
button
learn the radio frequency codes of
most current transmitters to operate
devices such as gate operators,
Status
garage door openers, entry door
locks, security systems, even home
lighting. Both standard and rolling
button
code-equipped transmitters can be
programmed by following the out-
lined procedures.
Additional HomeLink
can be found at: www.homelink.com
or by calling 1-800-355-3515.
Retain the original transmitter of the
RF device you are programming for
use in other vehicles as well as for
future HomeLink ®
also suggested that upon the sale of
the vehicle,
HomeLink ® buttons be erased for
security purposes.
®
Wireless
Wireless Control
(RF)
® information
programming. It is
the programmed