Hyundai Elantra Manual page 103

High beam operation
To turn on the high beam headlamp,
push the lever away from you. The
lever will return to its original posi-
tion.
The high beam indicator will light
when the headlamp high beams are
switched on.
To turn off the high beam headlamp,
pull the lever towards you. The low
beams will turn on.
Do not use high beam when
there are
approaching you. Using high
beam could obstruct the other
driver's vision.
OOS047407N
To flash the high beam headlamp,
pull the lever towards you, then
release the lever. The high beams
will remain ON as long as you hold
the lever towards you.
High Beam Assist (HBA)
WARNING
(if equipped)
other vehicles
The High Beam Assist (HBA) is a
system that automatically adjusts the
headlamp range (switches between
high beam and low beam) according
to the brightness of other vehicles
and road conditions.
OOS047408N
Operating condition
1. Place the headlamp switch in the
2. Turn on the high beam by pushing
OOS047409N
AUTO position.
the lever away from you.
The High Beam Assist (HBA) (
indicator will illuminate.
3
)
3-103