Table of Contents
Advertisement
Getting Started
Replacing Your Phone's Covers
1 Locate the four notches on the front
cover.
2 Holding the front cover horizontally
(flat), place the keypad in the cover.
3 Push down on each of the notches to
secure the keypad in the cover.
Note! Once properly installed, the
keypad will remain in the
cover if you turn the cover
over.
4 Locate the tab on the top of the
cover.
5 Holding the front cover at an angle,
as shown in the illustration, insert the
tab into the notch on the phone.
6 Snap the bottom of the cover into
place.
7 To replace the back cover, see "Step
2: Attach the Back Cover" on page
12.
16
Some menus/features are operator dependent.
Advertisement
Table of Contents
