Dimension
Interfaces to external
devices supported by the
handset and available for a
GPRS link
Downlink data rate
Uplink data rate
Mode of operation
R Reference point
IP connectivity
Application
QoS
PDP context
SIM
AT commands supported
Support in theT610/612
IrDA, RS-232, AT commands. IrDA,
Datarate=SIR & MIR RS232,
autobaud, max 460kbit/s Bluetooth,
v1.0B+Critical errata, Certified and
listed Supported Bluetooth profiles:
DUN, FAX, Headset, Synch, Object
push
Up to 85,600 bps for packet data communication, using 4 time slots in coding
scheme CS-4
Up to 21,400 bps for packet data communication, using 1 time slot in coding
scheme CS-4
Class B and Class C modes of operation supported. It is possible for the user to
choose if the Circuit Switched services should be favoured.
Physical layer: Support of RS232
PPP is supported as L2 layer in the R reference point
Authentication algorithms PAP, CHAP supported
PDP type IP is supported
IP termination in mobile or TE (laptop, PDA) supported
WAP over GPRS supported (UDP/IP and GPRS-SMS)
SMS over GPRS (SMS-MT, SMS-MO) supported
QoS negotiation supported. Default requested QoS sent by the handset at PDP
context activation is reliability Class 3. Peak/Mean/Delay/Precedence Class:
subscribed
•
Precedence class supported (1,2,3)
•
Reliability class 1-5 supported
•
Delay classes supported (1,2,3,4)
•
Mean and peak throughput rate limited by multislot class 4 and CS-4
10 PDP context descriptions stored in mobile
PDP context description is edited via application in mobile, AT-command or via
OTA
Simultaneous PDP contexts not supported
Network requested PDP context not supported
GPRS aware, as well as non GPRS aware SIMs are supported
•
AT+CGDCONT - DEFINE
PDP CONTEXT
•
AT+CGQREQ - Quality of Ser-
vice Profile (REQUESTED)
•
AT+CGQMIN - Quality of Ser-
vice Profile (Minimum Accept-
able)
•
AT+CGATT - PACKET
DOMAIN SERVICE ATTACH
OR DETACH
67
White Paper
•
AT+CGACT - PDP CONTEXT
ACTIVATE OR DEACTIVATE
•
AT+CGDATA - ENT
T610/612