Advertisement
The following instructions and pictures are provided to assist your installation of the EVGA CPU Closed
Loop Water Cooling Kit to Intel LGA20XX / 1366 / 115X and AMD FM1 / 2, AM2 / 3 / 4 motherboards.
Please be careful when installing the cooling kit; there several very small fasteners that can be stropped if
you are not careful. Before you begin, please verify the contents of the box to ensure that the following
items present:
(A)
(B)
Intel LGA20XX
(2011, 2011-v3, 2066)
(M4 thread)
(F)
AMD AM2 / AM3 / AM4
FM1 / FM2
Intel Backplate Installation
1)
If you are an Intel LGA115X or 1366 user, please put Part G on the back of motherboard. Side standoffs to
line up with cooler mounting holes in your motherboard. Please skip this step for LGA20XX and AMD
motherboards; backplates are not used for LGA20XX sockets and AMD backplates are supplied with the
motherboard.
Intel LGA115X
(G)
2)
Next, screw the standoff into the backplate of the motherboard.
For LGA115X and LGA1366 sockets, please use the M3 thread
(Part B) to screw standoff into the baseplate. LGA20XX users
should use M4 thread (Part A) to screw standoff into the threaded
mounting holes at the corners of the socket's retention clamps.
Use the UNC 6-32 threads (Part C & Part D) for the AMD platform.
Intel LGA115X / 1366
(1150, 1151, 1155, 1156, 1366)
(M3 thread)
(G)
Intel LGA115X / 1366
Intel LGA1366
(C)
AMD AM2 / AM3 / FM1 /
FM2 (UNC 6-32 thread)
(H)
Screw Nuts (M3 thread)
a. Screw standoff base
into backplare. B C or D
(D)
(E)
AM4(UNC 6-32 thread)
(I)
USB Cable
b. Place retention ring
c. Screw retention ring
over standoff top. E or F
in place using screw nuts. H
Intel LGA115X / 1366 /
20XX Retention Ring
Advertisement
