Introduction - Toshiba TB6605FTG Reference Manual

1. INTRODUCTION

This reference guide describes the usage of Motor Control Closed-loop system incorporating Toshiba's
BLDC motor driver IC TB6605FTG. The board is designed as a plug-in board (Shield) for Arduino UNO
platform. This document provides guidelines to quickly setup the hardware and software for BLDC motor
driver IC performance evaluation.
This system can be used as two types:
1. MCD + MCU mode
2. MCD + Op-Amp mode
Motor Control Closed-loop System evaluation kit includes:
Motor Control Reference Board (with Arduino connector)
‒
* Arduino is not attached.
Brushless Motor (attached)
‒
In MCD+MCU mode, the following items are needed for evaluation.
-MCU Arduino (Not attached, Commercial goods)
-LCD module (Commercial goods)
© 2019
Toshiba Electronic Devices & Storage Corporation
Figure 1-1 Motor Control Closed-loop system
4 / 31
RD022-RGUIDE-01-E
2019-Jan-15
Rev.1.0