Assembly Instructions - Kogan KARDRVCRPKA Quick Start Manual

Assembly Instructions

1. Front Wheel
Set the gasket and bushing into the front axle, then put the wheel on it. Next, insert the gasket
and bushing on the wheel and lock them with the locknut. Finally, fix on the wheel cover. (As
shown in Picture 1)
2. Real Wheel
Put the gear on the rear wheel and fix the gear with 4 pieces ST4 0x16 screws. Next, turn the
car over, insert the wheel into the rear axle then put the gasket and bushing on it and fix them
with the screws. Finally, cover the wheel with cap. (As shown in Picture 2)
3. Wind Shield
Take out the windshield carefully from the box, then insert the windshield into the slot. It is
assembled correctly when you hear a click click. (As shown in Picture 3)
3