Bissell SPOTBOT 2117 Series User Manual page 9

Getting Started
Important! Please check manufacturer's tag before cleaning area rugs for any
specialized cleaning instructions. Not for use on silk or delicate area rugs.
Before using, test a small
1
inconspicuous area for
colorfastness.
Hands-Free Cleaning
1
Place the unit directly over the spot or
stain, making sure the stain is in the center
of the cleaning area.
3
When the cleaning cycle you have
selected is complete, the Done light will
illuminate and the machine will sound a
series of "beeps". Press the STOP button
to turn the machine OFF. The machine
will not beep when turned OFF
NOTICE: To prevent damage to Berber carpets, avoid repeated cleaning cycles in
the same area.
Select "Hose/Tool" and follow
2
manual cleaning instructions on
page 10 to test.
2
Select which cleaning cycle (Quick Clean
or Deep Clean) you would like to use.
SpotBot® will begin spraying, brushing
and suctioning the soiled area, in a pre-
programmed cycle. Both cycles have been
tested and proven to deliver superior
cleaning results, taking the guesswork and
effort out of cleaning for you.
4
Pick up the unit and check the area that
was cleaned.
If you use BISSELL® Oxy Boost, it will
continue to work for the next six to eight
hours, cleaning your spots and stains all
the way to the backing of the carpet.
www.BISSELL.com
9