Bissell SPOTBOT 2117 Series User Manual page 7

Filling Your Clean Water Tank:
Portable Machine Formula (2X Concentrated)
1
Remove the Clean Water/Solution Tank by
lifting it straight up and then away from
the unit.
3
Add hot (140°F/60°C MAX) tap water to
water fill line.
Do not use boiling water. Do not heat
water or tank in microwave.
Pour in more power with
BISSELL Boosts
• Fill tank with water and 2X formula
(Step 4 above).
• Add 1 ounce of any BISSELL Boost.
2
Unscrew the black cap at the bottom of
the Clean Water Tank.
4
Add formula by following the
indicated "formula" fill line on your
clean tank.
5
Twist the cap back into place and set
tank back on unit.
www.BISSELL.com
7