Cable; Gsm Networks - Sony Ericsson P908 User Manual

This is the Internet version of the user's guide. © Print only for private use.

Cable

Use to set the cable connection mode and the connection
Cable
parameters used when communicating through your P908's
cable port.
• Set the cable connection mode. Please note that you must set
the mode to when using the P908 as a modem and
Modem
when using the DUN (Dial-up Networking) Wizard.
• Set the baud rate, parity, number of stop bits, character length
and type of flow control required for the connection. When
connecting your P908 via the desk stand to a USB port on
your PC, use the following (default) settings:
Baud rate
115200
Parity None
Stop bits 1
Character length 8
Flow control
CTS/RTS
Tip You can set the cable connection mode when the Flip is
closed by selecting
Applications >
Cable.
154
Connections >

GSM Networks

This option lets you choose what net to use when you are
outside your operator's area. Choose if you want to search for a
new network or use a preferred one. You can also make a list of
preferred networks.
• – Select between automatic or manual search for
Search mode
a network.
• – Tap the button to get a list of available
Select network
networks.
• – Tap the button to search for available networks.
New search
• – Show the networks that your P908 will search
Preferred list
for when you are outside your home network.
Note Your operator may not allow you to access all available
networks.
To add a network to the preferred list
1. Tap .
Add network
2. Select a network from the displayed list.
3. Select a position in the Preferred list and tap .
Done
Control panel