Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Adam Equipment 2120011268
Summary of Contents for Adam Equipment 2120011268
- Page 1 Adam Equipment ADAM THERMAL PRINTER Software Revision V1.6AT & above ...
- Page 2 EN ENGLISH Easy Reference: Serial number of the printer: Model of the product linked to this printer: Software revision number of the product linked to the printer: Serial number of the product linked to the printer: Date of Purchase: Name of the supplier and place: © Adam Equipment Company 2013 2 - 16...
-
Page 3: Table Of Contents
1.0 CONTENTS (P.N. 3126611270 Revision B3, October 2016) INTRODUCTION ....................2 SETTING UP ......................3 Technical Specifications ..................4 Printer Installation and Operation ................. 6 Packing List ......................6 Printer connection ....................7 Paper Roll Installation ................... 8 Front panel descriptions ..................8 Serial Interface ...................... 9 ATP BAUD RATE SETTING INSTRUCTIONS ............ -
Page 4: Introduction
EN 1. INTRODUCTION The Adam Thermal Printer is a general purpose thermal tally roll printer specifically designed to work with the Adam series of balances. The printer comes preset to work with the default RS-232 interface found on the Adam balances but can easily be changed to work on other equipment as well. -
Page 5: Setting Up
EN SETTING UP IMPORTANT Clean the print head regularly to avoid poor print quality, only attempt to clean when the printer is off and the head has had time to cool. Clean with a soft cloth using diluted alcohol. Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents. ... -
Page 6: Technical Specifications
EN 3. TECHNICAL SPECIFICATIONS ● Print method：Thermal line printing ● Paper width：57.5 ± 0.5mm ● Effective print width：48mm ● Print speed：50mm/s or 14 lines/s ● Print Head Performances： Print columns：384 dots/line or 8 dots/mm Reliability print：50Km ● Interface: Serial interface: D-SUB 25 socket, optional baud rate 2400bps, 4800bps, 9600bps、19200bps、38400bps，57600, 115200, default is at 4800bps, data structure no parity, 8 digital word size,1 digital stop bit, supports RTS/CTS and XON/XOFF... - Page 7 EN ● Characters： ASCII character set：12×24 dot，1.25（W）×3.00（H）mm ● Print paper： Paper type：Thermal print paper Paper width：57.5±0.5mm, Paper thickness：0.06～0.08mm Roll outer dia. (max.） ：Φ51mm Recommend thermal print paper: ADAM Box of 10 – part number 3126011281 Box of 20 – part number 3126011282 ●...
-
Page 8: Printer Installation And Operation
EN 4. PRINTER INSTALLATION AND OPERATION Packing List Item Part Number Quantity Adam Thermal Printer 2120011268 Power Adaptor Module 3124011269 Mains cable Country dependant RS 232 (25 pin to 9 pin) 3124011279 cable - female RS 232 (25 pin to 9 pin) -
Page 9: Printer Connection
EN Printer connection Please connect the cables as shown. Make sure the printer and HOST machine are powered off and connect the data communication cable to the SERIAL PORT The RJ-11 jack is for use when connecting the printer to a cash drawer. Connect the Power adaptor to the printer and electricity supply (c) Turn the printer on using the ON/OFF switch located at the rear of the printer... -
Page 10: Paper Roll Installation
EN 5. PAPER ROLL INSTALLATION The thermal paper is fitted as below （1）Open the top cover （2）Place the paper roll into the space provided in the following way. Correct direction Wrong direction （3） Pull the leading edge of the paper outside of the printer and then close the top cover. -
Page 11: Serial Interface
—— Printer Same with RTS signal(pin 4) All Adam Equipment scales and balances use a 3 wire cable connection which includes TXD, RXD and GND. DTR and RTS are not required Printer serial interface DB-25 Host machine serial interface DB-9... -
Page 12: Atp Baud Rate Setting Instructions
EN 8. ATP BAUD RATE SETTING INSTRUCTIONS Please contact Adam Equipment to obtain the application tool required 1. Connect the ATP to your PC using the cable provided 2. Power ON the ATP 3. Open the ATP baud rate setting application 4. -
Page 13: Command Function List
EN 9. COMMAND FUNCTION LIST No. Commands Name 1 HT Horizontal tab 2 LF Print and line feed 3 CR Print and carriage return 4 ESC SO Select Double Width 5 ESC DC4 Disable Double Width 6 ESC SP n Set character right space amount 7 ESC ! n Batch specify print mode... - Page 14 During the warranty period, should any repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company. The company or its authorised Technician reserves the right to repair or replace the components at any of its workshops depending on the severity of the problems. However, any freight involved in sending the faulty units or parts to the service centre should be borne by the purchaser.
- Page 15 Adam Equipment products have been tested with, and are always supplied with mains power adaptors which meet all...
- Page 16 E-mail: info@adamequipment.com.cn © Copyright by Adam Equipment Co. Ltd. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment. Adam Equipment reserves the right to make changes to the technology, features, specifications and design of the equipment without notice.
Need help?
Do you have a question about the 2120011268 and is the answer not in the manual?
Questions and answers