High-speed impact dot matrix printer with a durable design making it suitable for long-term storage. The AIP is easy to use with only an On/Off switch and a paper feed button. The AIP is supplied with a power supply adapter, to charge the internal rechargeable battery operation.
Connect the power adapter to the AIP and electricity supply. Turn on the balance, then turn the AIP on using the ON/OFF switch located on the left-hand side of the printer (Switch in ‘I’ position) ...
This function will automatically detect and set the communication parameters to make the printer compatible with any balance. Connect the AIP to your balance using the relevant cable provided Power ON the AIP whilst holding down the ‘LF’ key The following contents should be printed: ...
Page 13
Store printer in a dry environment Keep the AIP in its packaging when it is not in use for prolonged periods of time. To avoid damage, it is strongly recommended to use the ink ribbon and other consumables supplied by Adam Equipment.
During the warranty period, should any repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company. The company or its authorized Technician reserves the right to repair or replace the components at any of its workshops depending on the severity of the problems.
Page 15
Adam Equipment products have been tested with, and are always supplied with mains power adapters which meet all legal requirements for the intended country or region of operation, including electrical safety, interference and energy efficiency. As we often update adapter products to meet changing legislation it is not possible to refer to the exact model in this manual.
Need help?
Do you have a question about the AIP and is the answer not in the manual?
Questions and answers