Advertisement
J
Extended Settings
The data interface KEY is preset and cannot be changed.
Activating and deactivating mains synchronisation.
The default setting is PASSIVE. In order to improve the long-term accuracy, it is advisable to activate synchronisation on 50/60 Hz mains with
frequency adjustment.
Cycle function for channel 1
min
PERIOD
2 s
PULSE-TIME
1 s
Instead of its STANDARD function, the output of channel 1 is switched on and off cyclically. The available parameters are the PERIOD and the
PULSE-TIME within this period.
Program channel 1,
or control signal S
Channel-1 relay
max
2h
1h 59min 59s
15:00:00
0:10:00
PERIOD
PULSE-TIME
0:04:00
without function
15:10:00
0:10:00
PERIOD
PULSE-TIME
0:04:00
15:20:00
0:10:00
PERIOD
PULSE-TIME
0:04:00
15:30:00
15:32:00
Advertisement
