1. Manuals
  2. Brands
  3. artisan Manuals
  4. Computer Hardware
  5. RadiSys EPC-26A
  6. Hardware reference manual

artisan RadiSys EPC-26A Hardware Reference Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
artisan RadiSys EPC-26A Hardware Reference Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RadiSys EPC-26A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for artisan RadiSys EPC-26A

Summary of Contents for artisan RadiSys EPC-26A

  • Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...

  • Page 2: Product Description

    File/Utilities diskette containing formatting software and SRAM drivers. The software is explained in detail in the XFORMAT Software User’s Manual that accompanies the diskette. Page 1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 3 ® -26A/27 Hardware Reference ® RadiSys Corporation 15025 S.W. Koll Parkway Beaverton OR 97006 (503) 646-1800 FAX: (503) 646-1850 ________________________________________________________________ 07-0266-00 June 1995 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 4 Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corporation. Intel and Intel486 are trademarks of Intel Corporation. June 1995 Copyright © 1995 by RadiSys Corporation All rights reserved. Page ii Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 5 PURPOSE OR USE, TITLE AND NONINFRINGEMENT. Repair or replacement as provided above shall be the Purchaser's sole and exclusive remedy and RadiSys' exclusive liability for any breach of warranty. Page iii Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 6 EPC-26A/27 Hardware Reference NOTES Page iv Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 7: Table Of Contents

    Video Controllers..................25 Front Panel LED..................25 Optional Flash/SRAM Memory..............25 Watchdog Timer ..................26 Resetting the EPC..................27 4. Connectors ....................29 Serial Ports....................29 Keyboard ....................30 EXM Expansion Connector ................30 Page v Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 8 Appendix A: Mechanical Dimensions ............1 Appendix B: Chip Set & I/O Map ..............1 Appendix C: Interrupts and DMA Channels ..........1 Interrupts....................1 DMA Channels................... 2 Page vi Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 9: Specifications

    NOTE: The EPC-27 requires 200 ft/min airflow for 60°C operation. For configurations with no airflow, the maximum operating temperature for the EPC-27 is 43°C. See Appendix A for mechanical dimensions. Page 2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 10: Bios Configuration

    EPC into the card guides. Firmly press the EPC front panel to ensure that the module is properly seated in the subplane and secure it with the thumb- screws. Page 3 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 11: Bios Setup Screens

    Once the entry has been changed to appear as desired, use the up and down arrow to move to the next field. Page 4 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 12: Main Bios Setup Menu

    1.44 MB floppy disk drive. Other options include 360K, 720K, 1.2 MBytes, and 2.88 Mbytes. If no drive is installed, the proper setting is NOT INSTALLED. Page 5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 13: Ide Adapter Sub-Menus

    RadiSys hardware. To see the detailed characteristics of the device or to change the device, choose the IDE Adapter 0 Master Sub-Menu to configure the fixed disk. The following screen displays: Page 6 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 14 “Autotype” feature, then select “User” for the Type and enter the correct drive values for cylinders, heads, and sectors/track from the label attached by RadiSys at the factory. Page 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 15 Use this option to set the system to delay booting for a time period in seconds that you set. This allows for long start up times on boot devices that spin up slowly. The default is zero. Page 8 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 16: About Drive Letter Assignment

    26A/27 hardware and BIOS is booting from a Flash ROMdisk. For more information on booting from a Flash ROMdisk, refer to setups in the Advanced Menu and the XFORMAT Software User’s Manual. Page 9 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 17 When you have completed the Boot Options Menu, exit back to the Main BIOS Setup Menu using the ESC key and complete the Keyboard Features Sub-Menu. Page 10 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 18: Keyboard Features Menu

    Keyboard auto-repeat rate: Use this option to set the auto-repeat rate if holding a key down on the keyboard. The rates are from 2-30 per second. Page 11 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 19: Advanced Menu

    COM ports. This does not configure Ethernet, video, or Flash memory. For more information, turn to the section concerning the Integrated Peripherals Sub-Menu. Page 12 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 20: Memory Shadow Sub-Menu

    Please note that you cannot have an IDE drive if the resident Flash memory is the boot device. For more information, refer to “About Drive Letter Assignment”. Page 13 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 21 The term “Memory Shadow” refers to the technique of copying information from ROM into RAM and accessing it in this alternate memory location. The Memory Shadow Sub-Menu is discussed below. Page 14 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 22 Flash ROM disk. When this ROM extension is installed, it is automatically shadowed. To exit this menu, press the ESC key. You return to the Main Menu. This completes the setups for the Advanced Menu. Page 15 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 23: Exm Menu

    CMOS. The EPC-26A/27 will configure the EXM bus according to the number of EXM slots selected. The default slot configuration is for 12 slots. 9 10 Page 16 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 24: Exm Menu Entries For Epc-26A/27

    2 configuration data. When you are finished with this menu, press the right arrow key to move to the Exit Menu, or press ESC. Page 17 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 25 Note that while most EXM hardware reference manuals depict a different setup BIOS from the EPC-26A/27, the ID/OB1/OB2 information is valid. Page 18 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 26: Exit Menu

    Load Previous Values Save Current Values Help Select Item -/+ Change Values F9 Setup Defaults Exit Select Menu Enter Select Sub-Menu Previous Values Figure 2-11. Exit Menu. Page 19 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 27 Save Current values Use this option to save the edits you have made during this session. You do not exit, and you can resume editing. Page 20 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 28 BIOS Configuration NOTES Page 21 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 29: Theory Of Operation

    SIMM memory modules that are delivered in this product in the socket of another product that uses 5V memory devices. This could cause permanent damage to the memory devices. Page 21 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 30: Memory Expansion

    (i.e. for extended memory managers, Ethernet, etc.) or may be used by DOS as upper memory blocks if an extended memory manager driver is installed. Page 22 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 31: Rom And Rom Shadowing

    Should the battery fail, you may obtain and install a replacement. The figure below illustrates how to change the battery. Page 23 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 32: Jumpers

    Force BIOS Update Reserved for future use. Use to enable writing to flash Do not use Forces a hosted re-flash of the BIOS. Must jumper H3 also. Page 24 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 33: Video Controllers

    SRAM. Note that the Flash/SRAM included with the EPC is compatible with the EXM-2A architecture. If this option is included, the EPC appears to software as though there were an integrated EXM-2A in the system. Page 25 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 34: Watchdog Timer

    815D. This will inhibit a spurious timer event from occurring just after enabling the timer. Watchdog Register 815D 7 - 2 Unused Reset enable Page 26 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 35: Resetting The Epc

    However, the operating system will be reloaded. This type of reset typically only works under DOS. Additional abnormal conditions that cause a reset Low Vcc No DRAM refresh signal from the micromonitor Page 27 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 36 EPC-26A/27 Hardware Reference NOTES Page 28 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 37: Connectors

    = 5V min @ 3K load to GND. COM1 is defined in the following table: Pin Signal Pin Signal Ring indicator Ground Table 4. COM1 DB9 Pin-out. Page 29 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 38: Keyboard

    Pins B1 through B58 are on the solder side of the board with pin B1at the bottom of the board. More information about the EXM interface is available upon request. Page 30 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 39: Troubleshooting & Error Messages

    Verify that +5V power is good and will not run power-on self- power. that the EPC is fully seated. test. Hardware failure. Replace the EPC. Page 31 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 40: Common Error Messages

    One of the entries in the CMOS RAM is incorrect. Solution(s): Run the BIOS setup program to determine what is wrong, and correct it. If the error occurs repeatedly, the EPC's battery has failed. Page 32 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 41 If you are not using an IDE drive, enter the BIOS setup program. Enter the Fixed disk menu. Change the drive type to match the device being used. Page 33 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 42 Solution(s): Select a different logical drive. If you are trying to access a hard disk, you may need to create the logical partition. Page 34 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 43 This can also occur if the hard disk is partitioned and one partition is set active, but the partition is not formatted. Format the partition using the utilities supplied with your operating system. Page 35 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 44 A C: drive exists but is not set active. Solution(s): Run your operating system disk partitoning program (like FDISK) and set the primary partition active. Page 36 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 45 The battery-backed TOD clock is incorrect. Solution(s): Run the BIOS setup program to determine what is wrong, and correct it. If the error occurs repeatedly, the EPC's battery has failed. Page 37 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 46 EPC-26A/27 Hardware Reference NOTES Page 38 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 47: Programming Interface

    The first two registers are standard read/write EXM registers for device identification and configuration. The EPC-26A/27 responds to accesses to ports 100h and 102h only if its EXM expansion interface line -EXMID is as- Page 39 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 48: Configuration Registers

    Low-Middle, High-Middle, and High registers (and the lower address register, if the previous string read/write to flash/SRAM was not 256 bytes in length) before issuing another 256 byte string read/write. Page 40 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 49: Flash Data Access

    The SRAMDISK.SYS driver issues a warning before continuing. The remainder of the bits in register 8387 are undefined. Page 41 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 50: Sram Standard Memory Array

    // Read a section using the autoincrement feature. for (rinductor = 0; rinductor < BYTESPERSECTION; rinductor++) { *target++ = (UCHAR) inp(SRAMDATA); outp(0x102,ob); /* restore the option byte */ Page 42 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 51 (minductor = 0; minductor < BYTESPERSECTION; minductor++) test[minductor] = minductor; writesection(test,0); readsection(readbuffer,0); if (memcmp(test,readbuffer,BYTESPERSECTION)) printf("Buffer did not compare \n\r") else printf("Buffers comparison ok \n\r"): Page 43 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 52 EPC-26A/27 Hardware Reference NOTES Page 44 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 53: Support And Service

    The BBS operates at up to 14400 baud. Connect using standard settings of eight data bits, no parity, and one stop bit (8, N, 1). The telephone number is (503) 646-8290. Page 45 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 54: Repair Services

    (functional testing) of a product either in or out of warranty, and procurement of spare parts. Page 46 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 55: Arranging Service

    Ship the product, freight prepaid, to Product Service Center RadiSys Corporation 15025 SW Koll Parkway Beaverton, Oregon 97006-6902 Page 47 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 56: Other Countries

    Any ancillary information that might be helpful with the debugging process will be appreciated. Other Countries Contact the sales organization from which you purchased your RadiSys product for service and support. Page 48 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 57: Appendix A: Mechanical Dimensions

    Appendix A: Mechanical Dimensions Figure 8. EPC Mechanical Dimensions. Page A1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 58 EPC-26A/27 Hardware Reference NOTES Page A2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 59 Appendix A: Mechanical Dimensions Figure 8. EPC Mechanical Dimensions. Page A1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 60 EPC-26A/27 Hardware Reference NOTES Page A2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 61: Appendix B: Chip Set & I/O Map

    PicoPower Redwood chip set emulating 8259 of PC/AT I/O Addr Functional group Usage Interrupt controller 1 Port 0 Port 1 82C42 controller: I/O Addr Functional group Usage Data register Index register Page B1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 62 Channel 3 page register Channel 1 page register Channel 0 page register Channel 6 page register Channel 7 page register Channel 5 page register Refresh page register Page B2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 63 Baud rate divisor latch (LSB) Interrupt enable register Baud rate divisor latch (MSB) Interrupt ID register Line control register Modem control register Line status register Modem status register Page B3 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 64 Baud rate divisor latch (LSB) Interrupt enable register Baud rate divisor latch (MSB) Interrupt ID register Line control register Modem control register Line status register Modem status register Page B4 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 65 Appendix B: Chip Set & I/O Map Page B5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 66: Appendix C: Interrupts And Dma Channels

    IRQ8 clock IRQ9 unassigned IRQ10 watchdog timer (for Flash/SRAM option) IRQ11 unassigned IRQ12 unassigned IRQ13 coprocessor IRQ14 used by optional IDE disk controller IRQ15 unassigned Page C1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 67: Dma Channels

    4 (Channel 0 - Channel 3 cascade through Channel 4) 5 unassigned (16-bit) 6 unassigned (16-bit) 7 unassigned - not connected to EXM expansion interface (16-bit) Page C2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 68 Letters that display include S (system file), H (hidden file) and R (read-only). To prepare the hidden file MSDOS.SYS for copying, type either of the following: ATTRIB -s -h MSDOS.SYS ATTRIB MSDOS.SYS -s -h Page D1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 69 Be sure to re-run ATTRIB after copying the files to the destination disk to reset the system files. Page D2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 70 Create a directory on the C: drive called C:\EPC (or another name you choose). Copy the files from the distribution diskette to the C:\EPC directory. Page E1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 71 It is possible to create a bootable disk image from a non-bootable source drive. Refer to Appendix D for details. This flag is for use with flash disks only. Page E2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 72 XFORMAT is used in a batch file where the reboot command is at the end of the batch file. Page E3 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 73 Formats the flash memory and copies all files from device A: to the flash (including subdirectories). The EPC will not be bootable if not formatted with the /S or /B flag. XFORMAT /p=0 /N=6 /b=d: C:\FLASH Page E4 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 74 2.5V, an error message displays for a few seconds before continuing. To load the SRAMDISK.SYS driver, edit the CONFIG.SYS file and insert the following line: DEVICE=[path]SRAMDISK.SYS /[slot] Page E5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 75 The SRAMDISK.SYS driver must compute the same checksum in order for the sector read to be successful. Corrupt sectors may be repaired with standard disk tools such as Norton Utilities. Page E6 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 76 INVALID SOURCE PATHNAME Error Message Explanation XFORMAT could not find the directory specified as the source pathname. Resolution Ensure that the source pathname exists. Page E7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 77 CONFIG.SYS does not contain enabled flash memory. Resolution Enable the flash in the EXM Setup Screen, or verify that the flash is listed in the correct slot. Page E8 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 78 EXM Setup Screen. Error Message UNRECOGNIZED FLAG Explanation A mis-spelled or illegal flag was used. Resolution Check the command line to ensure only legal flags are used. Page E9 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 79 "read only" media, such as CD-ROM disks. DOS functions such as COPY and XCOPY will operate correctly when copying from the flash disk. Page E10 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 80 DOS COPY command to copy the files from the \30505 directory. Page F1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 81 16) to allow writing to the flash device. Remove this jumper after programming since aberrant programs may write to the flash device and corrupt the BIOS. To update the BIOS in self-hosted mode, follow the instructions below: Page F2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 82 8 KBytes fill file for unused portion of flash device FILL16.BIN 16 KBytes fill file for unused portion of flash device EPC24.BIN 64 KBytes EPC System BIOS Page F3 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 83 NEWBIOS /S To reverse the process and load the saved CMOS parameters in the flash memory back into CMOS, type the following: NEWBIOS /L Page F4 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 84 COM1 and COM2 ports, 14 CMOS RAM, 4, 23, 32 Exit Menu, 18 Com1, 1, 29 EXM Setup Menu, 16 COM1 and COM2 ports, 14 Page I-1 1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 85 Interrupt File/Utilities diskette, 1 assignments, 18 filter networks, 1 interrupt mapping, 1 Flash, 39 IRQ conflicts, 18 flash chip, 23 Flash memory, 1, 13, 23 Page I-2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 86 3–19 optional SRAM, 23 SIMM socket, 1, 21 out of cache, 25 software, 1 overflow, 26 SRAM, 1, 25, 39, 42 address aliasing, 41 Page I-3 3 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 87 26 watchdog timer, 1, 26 write enable jumper, 24 writing custom software drivers, 39 XFORMAT software, 26, 41 XFORMAT Software User’s Manual, 1, 9, 26 Page I-4 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 88 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...

This manual is also suitable for:

Radisys epc-27

Table of Contents