Subscribe to Our Youtube Channel
Related Manuals for ALLNIC AUDIO HA-5000
Summary of Contents for ALLNIC AUDIO HA-5000
- Page 1 ALLNIC AUDIO HA-5000 ACTIVE PHONO HEAD AMPLIFIER (PHONO PRE-PREAMPLIFIER) OWNER’S MANUAL...
- Page 2 (PHONO PRE-PREAMPLIFIER) Thank you for purchasing the Allnic Audio HA-5000 Phono Head Amplifier. We are certain your trust in Allnic Audio and its dealers worldwide, as well as your appreciation for the sound of this high-quality device, will be rewarded by its excellent operation for years to come.
-
Page 3: Table Of Contents
OPERATION TUBES SPECIFICATIONS WARRANTY FIGURES Please read about SAFETY before you attempt to use the HA-5000 Phono Head Amplifier - we care about our customers and the equipment, and we want you to enjoy this product for a long time! -
Page 4: Introducing The Ha-5000 Phono Head Amplifier
Allnic H-1202, H-1500 Plus, H-7000/V and H-8000 DHT. The HA-5000 is an active phono pre-preamplifier, not a “step-up transformer” like Allnic’s AUT-2000, which uses a transformer to boost the signal from the cartridge. -
Page 5: What's In The Box
NOT connect it to your AC outlet. Please contact your Allnic dealer. We advise that you keep the box and other packing materials that your HA-5000 came in. It will be useful if you sell your HA-5000 or in the unlikely event you need to ship it for service. -
Page 6: Safety
INITIAL SET-UP LOCATION, LOCATION, LOCATION Like all audio products using tubes, the Allnic Audio HA-5000 and its power supply need to be placed on a solid stand in a location that provides for good air circulation around the two head amplifier units. -
Page 7: Power Connection
(see Figure 3). The HA-5000 you have purchased is set internally for AC 110/120 volt – 60 HZ, or 220/230 volt – 50 Hz operation. There is no way to change this to another AC setting without return of the units to the factory for re-wiring, at the owner’s cost, including transport both directions. -
Page 8: Operation
Audio and its authorized representatives are not liable in any way whatsoever for any injury or loss incurred by the user or for damage to the HA-5000, any of its parts, or tubes or replacement tubes resulting from the user changing or attempting to change tubes. -
Page 9: Specifications
SPECIFICATIONS FOR THE ALLNIC AUDIO HA-5000 PHONO HEAD AMPLIFIER MC (Moving Coil – single-ended RCA) × 2 pair Inputs: • Single-ended RCA × 1 pair • Outputs: Screw Type x 1 • Ground: 15KHz to 30KHz, flat Frequency Response •... -
Page 10: Warranty
Date of purchase is the date indicated on the invoice for the product issued by Allnic Audio or its authorized representative. For the warranty to be valid, a defective product must be returned to Allnic Audio’s authorized representative for service prior to any unauthorized attempt to repair. - Page 11 Figure 2 – HA-5000 Power Supply Front View Figure 3 – HA-5000 Amplifier Unit Rear View...
- Page 12 Figure 4 – HA-5000 Amplifier Unit Front View...
Need help?
Do you have a question about the HA-5000 and is the answer not in the manual?
Questions and answers