___________________________________________________________________ SPECIFICATIONS ___________________________________________________________________ WARRANTY ___________________________________________________________________ FIGURES AND TABLES Please read about SAFETY before you attempt to use the H-3000 - we care about our customers and the equipment, and we want you to enjoy this product for a long time!
INTRODUCING THE H-3000 PHONO STAGE and possibly a pinched and compressed high frequency playback due to excess feedback ratios. The H-3000 is Allnic Audio’s top of the line phono stage model. Like all Allnic Audio products, it uses Permalloy Passive filters (CR type): (iron and nickel alloy) for its transformer cores.
Permalloy cores are used for the H-3000’s dual MC materials that your H-3000 came in. It will be useful if you inputs. sell your H-3000 or in the unlikely event you need to ship it New vacuum tube damping technology – Allnic or the power supply for service.
Dropping one side of either of There are two (2) sets of two (2) pairs of single-ended (RCA) the H-3000 units, or the whole of either unit, is not a inputs. These two pairs are located in the middle of the rear of good thing to do.
“+#dB scale. You should use identical settings for both transformers When you are facing the front of the H-3000, the two pairs of to avoid channel imbalance. MC connections are on the right/centre of the unit, with the...
checked that all your connections are snug between these two parallel lines. To turn on the H-3000, press in the button switch on the front If the needle has moved to the left of the parallel lines of the power supply marked with on and off icons (see Figure on a meter, it means that one or both the E810F tubes 4).
Page 9
× 4 (gain are borne by the user unless by express agreement between stages, left and right channels) the owner and Hammertone Audio. Allnic Audio and 7233 (no equivalent) × 2 (Voltage Hammertone Audio are not liable in any way whatsoever for...
For the warranty to be valid, a defective product must be returned to Hammertone Audio for service prior to any unauthorized attempt to repair. Any repair work on an Allnic Audio product not specifically authorized by Hammertone Audio will void the...
Page 11
Figure 1 – H-3000 Rear Panel View Figure 2 – H-3000 Power Supply Rear Panel View Figure 3 – H-3000 Chassis Top View - MC Transformer Controls...
Page 12
Figure 4 – H-3000 Front Panel View Figure 5 - H-3000 Power Supply Front Panel View...
Page 13
Figure 6 – H-3000 Top View Table 1: Impedance Combination Table T / R 1 / 13 1 / 20 1 / 26 1 / 40 (gain) (+22dB) (+26dB) (+28dB) (+32dB) S * R 10 KΩ 59 Ω 25 Ω...
Need help?
Do you have a question about the H-3000 and is the answer not in the manual?
Questions and answers