Safety - IBM 5280 Maintenance Information Manual

Safety
The diskette drives contain the following specific
DANGERS:
• Voltages are present on the connector terminals in the
diskette drive.
• Motor and solenoid cases become hot after continuous
use; allow enough time for parts to cool before servicing.
DANGER AND CAUTION NOTICES
Throughout this manual, the word DANGER is used to
inform the CE of an action that could cause a personal
injury. The word CAUTION is used to inform the CE of an
action that could damage the machine, or affect the
running of a customer program.
Danger Notices
Danger notices appear in the following maintenance
proced u res:
337 Head/Carriage Service Check
339 Head/Carriage Adjustment
341 Head/Carriage Removal and Replacement
343 Solenoid and Bai I Service Check
346 Solenoid and Bail Adjustment
347 Bail Removal and Replacement
349 Solenoid and Idler Removal and Replacement
351 AC Drive Motor Removal and Replacement
353 Capacitor Removal and Replacement
355 Drive Fan and Pulley Removal and Replacement
373 PTX Amplifier Service Check
x Safety
Caution Notices
Caution notices appear in the following maintenance
procedures:
335 Collet/Flat Spring Removal and Replacement
337 Head/Carriage Service Check
339 Head/Carriage Adjustment
340 Pressure Pad Removal and Replacement
341 Head/Carriage Removal and Replacement
346 Solenoid and Bail Adjustment
347 Bail Removal and Replacement
357 Stepper Motor Removal and Replacement
363 Drive Band Adjustment
365 Drive Band Removal and Replacement
375 PTX Removal and Replacement