Download Print this page

EarthQuaker Devices Avalanche Run Operation Manual page 5

Stereo reverb & delay with tap tempo
Hide thumbs Also See for Avalanche Run:

Advertisement

• Current Draw: 410 mA
• For best results, please use the included 9v center-negative 1-amp DC power supply.
• 24-bit 96kHz A/D & D/A converters
• S/N Ratio: 115dB typical
• Input Impedance: 1 MOhm
• Output Impedance: 100 Ohm
• All analog dry signal path
• All digital wet signal path with
20Hz – 20kHz frequency response
This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any
issues, please email info@earthquakerdevices.com.
©2019 EarthQuaker Devices LLC
<<< Power Requirements >>>
<<< Tech Specs >>>
<<< Warranty >>>
www.earthquakerdevices.com
• Selectable relay-based true bypass or
buffered analog tails modes
• PCBs populated by a combination of artificial
and human intelligence in the Akron, Ohio
of America.
• Each and every Avalanche Run is completely
assembled, wired and tested by total human
beans in the tiny tundra town of Akron, Ohio.
EQDAGV2-US-R0

Advertisement

loading