Step 7:
PARTS NEEDED: FOAM BLOCKS
At Foot of Bed, pivot both Side Panels slightly out and away from Bed Frame so bumpers on Side
Panels are out of way. Lift Foot of Bed 6" to 8" and slide Foam Blocks underneath to keep Bed
Frame elevated for the following steps.
bumper
Step 8:
PARTS NEEDED: 2 AIR PISTONS
Piston Head
Pop Piston Head at narrow end of Air Piston onto Pivot Ball on Plate on Right Side of Bed Frame.
WallbedFactory.com
1.800.975.8451
Bed Frame
Bed Frame
Foot of Bed
narrow end
Assembly Instructions
Tube Leg Murphy Beds
wide end
bumper
Piston Head
Page 8 of 19