Analog Audio; Connecting Power - Toshiba 32L310U20 Manual

32L310U20

Analog audio

Note
If the TV Speakers option on the Sound menu is set to Auto or Off, the TV
speakers are muted when you connect an analog sound system or sound
bar.
Audio out jack
1 Make sure that your TV's power cord is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the audio out jack on your TV and to the audio in jacks on the analog
speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 In the screen that opens, press
5 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.

Connecting power

1 If your power cord is not permanently connected to your TV, connect it to the power connector on your TV.
2 Connect the power cord to a power outlet.
Cautions
20
Audio cable
 
or to highlight Audio Output Fixed, then press ENTER.
• Your TV should only be operated from the power source indicated on
the label.
• Always unplug the power cord from the power outlet when you will not
be using your TV for an extended period of time.
• If the power cord is permanently attached to your TV, do not try to
unplug it from your TV.
www.tv.toshiba.com
Analog speaker system
Sound bar