Remote Control - Toshiba 32L310U20 Manual

32L310U20
Problem Solution
Good picture, but
• Increase the volume.
no sound.
• Make sure that the sound is not
• Make sure that you do not have
• Make sure that the TV Speakers
• If you are using a home theater
• If you are using a home theater
• If you are using a home theater
• Make sure that the audio cables
• Make sure that the antenna or
• The audio cables you are using
Poor picture.
• Make sure that the room is not
• If an S-VHS camera or a
Good sound, but
• Adjust the contrast, color, and
poor color.
58
muted.
headphones connected. When
headphones are connected, the
TV speakers are muted.
option on the Sound menu is
not set to Off.
system, sound bar, or external
speaker system, make sure that
it is turned on and is not muted.
system, sound bar, or external
speaker system, make sure that
you have selected the correct
output mode.
system, sound bar, or external
speaker system and have
connected it with a digital
optical cable, go to the Sound
menu, highlight Digital Audio
Output, then press ENTER.
Highlight Audio Format, then
 
press ENTER. Press or
select PCM, then press ENTER.
See the Digital Audio Output
option in Adjusting sound
settings on page 39.
are connected correctly and
securely to your TV.
cable TV is connected correctly
and securely. See Connecting a
cable or satellite box on page
or Connecting an antenna or
cable TV (no box) on page 14.
may be bad. Try a new set.
too bright. Light reflecting off
the screen can make the picture
difficult to see.
camcorder is connected while
another connected device is
turned on, the picture may be
poor. Turn off one or more
devices.
brightness settings. See
Adjusting the TV picture on
page 35.
www.tv.toshiba.com
Problem
Audio noise.
No output from
one of the
speakers.
After images
appear.
to

Remote control

Problem
Remote
control does
not work.
12
Solution
• Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
• Adjust the audio balance. See
Adjusting sound settings
page 39.
• Make sure that the audio cables
are connected correctly and
securely to your TV.
• Do not display a still image,
such as a logo, game, or
computer image, for an
extended period of time. This
can cause a permanent
after-image to be burned into
the screen. This type of damage
is not covered by your warranty.
Solution
• Make sure that the power cord is
plugged into a working outlet.
• Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
• Point the remote control directly at
the remote control sensor on your
TV.
• The supplied batteries are wrapped
tightly in clear plastic. Make sure
that you have removed this plastic
from the batteries.
• Make sure that the batteries are
installed correctly. See
remote control batteries
• Replace dead batteries with new
batteries. See Installing remote
control batteries on page 21.
on
Installing
on page 21.