Table of Contents
Advertisement
36|
Playing the Sounds
In the end, you will see the name of the selected Performance in the dedi-
cated area of the Main page. The Sounds assigned to the keyboard (shown in
the right half of the display) will change.
Choosing an STS
You can choose an STS from the control panel or from the display.
Choose an STS from the control panel
▪
Press one of the buttons in the STS section.
Select an STS from the display
1
While in the Main page, be sure the STS Name pane is selected. If it isn't,
touch the STS Name tab to select it.
2
Touch one of the STS names in the display to select it.
You will see the name of the selected STS highlighted in the dedicated area
of the Main page. The Sounds assigned to the keyboard (shown on the right
half of the display) will change.
Advertisement
Table of Contents
