Dispensing Volume side the warranty period, or those resulting from product misuse or Copy No. abuse, may be invoiced to you. Contact Longer Company or Longer’s dealers before returning Flow Rate Setting pump to repair. Pause Time Adopt original carton or reliable package when returning pump to Dispensing Calibration repair.
Micro Gear Pump Drive Operating Manual Instruction Basic Operation Acceptable pump heads for WT3000-1FB are MG204, MG209 and MG213. The pump delivers flow rates from 83 to 2750 mL/min and LCD Display dispensing volume is from 0.1 mL to 999 L. Combining 128 32 LCD display with membrane keypad and rotary coded switch makes the operation easy and prompt.
Micro Gear Pump Drive Operating Manual Micro Gear Pump Drive Operating Manual Knob 【 】 【 】 d. Running status: means the pump runs; means the pump 【 】 Function 1: Turn the Knob to adjust the flow rates in flow rates display state. stops;...
Micro Gear Pump Drive Operating Manual Micro Gear Pump Drive Operating Manual Pump Head Operation Flow Mode Operation Pump Head Installation: Enter Flow Mode The pump head is mounted on drive before the pump leaves the factory. Press and turn the Knob to highlight control mode line.
Micro Gear Pump Drive Operating Manual Micro Gear Pump Drive Operating Manual Flow Mode Operation Procedure Copy No. the total filling number in dispensing mode. Its range is from 0 to 9999. Press and turn Knob to highlight copy number line. Press Knob to enter next interface.
Micro Gear Pump Drive Operating Manual Micro Gear Pump Drive Operating Manual Exter nal Control Dispensing Calibration The parameters can not be changed under dispensing volume calibration Communication R 485 operation. The defaulted parameters are the parameters set under Control External Dispensing Setting.
I.D. This pump I.D. should be unique. It's the Gated: The pump runs as long as the footswitch is pressed. identification of this pump. Maximum 30 pieces WT3000-1FB can be Set footswitch controlled through RS485 at the same time.
Micro Gear Pump Drive Operating Manual Micro Gear Pump Drive Operating Manual Exter nal Control Output Specifications Pump is equipped with output port in order to monitor the status of Flow Rate 85.7~2571.4 (Ml/min) pump. Please see below “External Control Output Port pins Diagram: Dispensing Volume 0.1mL~999L DB9”.