Setup Menu - BANTE inststruments Bante821 Instruction Manual

Bante821 Portable Dissolved Oxygen Meter

Setup Menu

The Bante821 dissolved oxygen meter contains an integrated setup menu that is used to customize the displayed option to meet measurement requirements.
The following table describes the functions of the menu items.
MENU DESCRIPTION
Calibration Points:
Set the number of calibration points.
Pressure Coefficient:
Set the barometric pressure coefficient.
Salinity Coefficient:
Set the salinity coefficient.
Resolution:
Set the resolution of the DO measurement.
Measurement Unit:
Set the default measurement units.
Stability Criteria:
When the LO option is enabled, the Stable icon will
quickly appear on the display.
When the HI option is enabled, the icon will take
longer to appear, but guarantees high accuracy of
the measurement.
Auto-Hold:
When the option is enabled, the meter will
automatically sense a stable reading and lock the
measurements.
Auto-Power Off:
When the option is enabled, the meter will
automatically turn off if no key is pressed within a
specified time period.
Calibration Due:
When the option is enabled, if the meter does not
calibrated within a specified time period, the meter
will automatically show the
OPTIONS
mg/L
ppm
mmHg
kPa
...
icon.
DESCRIPTION
1 point
2 points
Range: 450~850mmHg or 60.0~113.3kPa
Range: 0.0~50.0ppt
0.01mg/L (0.1%)
0.1mg/L (1%)
Degrees Celsius
Degrees Fahrenheit
Milligrams per liter
Parts per million
Pressure unit
Pressure unit
Low
High
Enable
Disable
10 minutes
20 minutes
30 minutes
Disable
1 to 31 days
Disable
6
DEFAULT
1 point
760mmHg
0.0ppt
0.01mg/L
° C
mg/L
mmHg
Low
Disable
Disable
Disable