Switching The Meter On And Off; Setup Menu - BANTE inststruments TB100 Instruction Manual

5

Setup Menu

Switching the Meter On and Off

• Press and release the
• Press and hold the
Setup Menu
The TB100 portable turbidity meter contains an integrated setup menu that is used to customize the displayed option to meet measurement
requirement. The following table describes the functions of each menu item.
Menu Description
Set the number of calibration points
Set the date and time
Set the default turbidity unit
Set the resolution of measurement
Set the measurement mode
Auto-power off
Clear all data logs
Reset the meter to default settings
Setting the default option
1.1 Press and hold the
1.2 Press the ◄ / ► key to select a menu item, press the Enter key to confirm.
1.3 Press the ◄ / ► key to select a desired option, press the Enter key to confirm and return to the measurement mode.
key to switch on the meter.
key for 3 seconds to switch off the meter.
Options
---
NTU
FNU
EBC
ASBC
key for 3 seconds to enter the setup menu.
Description
2 to 5 points
Year, month, day, hour, minute
Nephelometric turbidity unit
Formazin nephelometric unit
Turbidity unit of the European Brewery Commission
Turbidity unit of the American Society of Brewing Chemists
0.01
0.1
Single measurement
Continuous measurements
Enable
Disable
Enable
Disable
Enable
Disable

3 sec.
Default
2
---
NTU
0.01
Yes
No
No
No