Part Names; Positioning The Console - Sony SCPH-50006 Instruction Manual

Part names

PlayStation 2 console
®
Front
Rear
You can position the console either horizontally
or vertically.
MEMORY CARD slots
When positioning the console vertically, use the
SCPH-10040 G vertical stand (for PlayStation
" " product family logo
(sold separately). If a vertical stand (for
PlayStation
in the horizontal position as shown below.
1 (standby)/RESET button and
When positioning the console horizontally, you
1 indicator
can use the SCPH-10110 G horizontal stand (for
PlayStation
IR receiver
A (open) button and
A indicator
Disc tray
Controller ports
L2 button, R2 button,
L1 button, R1 button
Notes
• Do not place the console in any position other than the
horizontal or vertical positions as doing so may damage it.
Directional buttons
• Do not change the position of the console while it is in
operation. Doing so may damage the disc or cause the
¢ button, a button,
console to malfunction.
✕ button, s button
START button
ANALOG mode button
SELECT button
Left analog stick,
right analog stick,
L3 button, R3 button
MAIN POWER switch
~
AC IN connector
AV MULTI OUT connector
DIGITAL OUT (OPTICAL)
connector
EXPANSION BAY

Positioning the console

2)
®
2) is not available, set the console
®
2) (sold separately).
®
Horizontal position Vertical position
The " " product family logo on the disc
tray
The " " product family logo on the disc tray
can be rotated to match the horizontal or
vertical positioning of the console.
Logo adjustment
5
GB