Sony SCPH-50006 Instruction Manual
Sony SCPH-50006 Instruction Manual

Sony SCPH-50006 Instruction Manual

Playstation 2
Table of Contents

Advertisement

Instruction Manual
Thank you for purchasing the PlayStation
®
computer entertainment system.
Before using this product, carefully read this
manual and retain it for future reference.
使用說明書
感謝您購買 PlayStation
2 電腦娛樂系統-
使用本機以前﹐請先詳細閱讀本說明書﹐並妥善保
存﹐以備將來參考之用-
SCPH-50006
© 2003 Sony Computer Entertainment Inc. All rights reserved.
2
TM
GB
CT
English
MEMORY CARD slots
MEMORY CARD(記憶卡)插口
"
" product family logo
"
1 (standby)/RESET button
1(預備)/RESET(再啟
and 1 indicator
動)按鈕和 1 顯示燈
IR receiver
紅外線接收器
A (open) button and
A(打開)按鈕和
A indicator
A 顯示燈
Disc tray
光碟托盤
Controller ports
控制器端子
USB connectors
USB 連接埠
L2 button, R2 button,
L2 按鈕﹐R2 按鈕
L1 button, R1 button
L1 按鈕﹐R1 按鈕
Directional buttons
方向按鈕
f button, a button,
f 按鈕﹐a 按鈕﹐
✕ button, s button
✕ 按鈕﹐s 按鈕
START button
START(開始)按鈕
ANALOG mode button
ANALOG(類比)方式開關
SELECT button
SELECT(選擇)按鈕
Left analog stick,
左類比操作桿﹐
right analog stick,
右類比操作桿﹐
L3 button, R3 button
L3 按鈕﹐R3 按鈕
3-086-039-21(1) F
中文
"家族企業標誌

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Sony SCPH-50006

  • Page 1 使用說明書 感謝您購買 PlayStation  2 電腦娛樂系統- 使用本機以前﹐請先詳細閱讀本說明書﹐並妥善保 存﹐以備將來參考之用- SCPH-50006 © 2003 Sony Computer Entertainment Inc. All rights reserved. 3-086-039-21(1) F English 中文 MEMORY CARD slots MEMORY CARD(記憶卡)插口 “ ” product family logo “...
  • Page 2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire or shock hazard, do not place a container filled with liquids on top of the console. To avoid electrical shock, do not open the cabinet.
  • Page 3 Never disassemble the console • Use your PlayStation 2 console according to the ® instructions in this manual. No authorization for the analysis or modification of the PlayStation 2 console, ® Disc logo nor the analysis and use of the product’s circuit configurations, is provided.
  • Page 4: Table Of Contents

    Table of contents WARNING Precautions Getting started Discs that can be played with the PlayStation Checking the package contents Part names Positioning the console Connection Connecting your console to a TV set Connecting digital audio equipment Connecting other digital equipment Using the main menu Playing a game Using memory cards...
  • Page 5: Part Names

    Part names PlayStation 2 console ® Front Rear Positioning the console You can position the console either horizontally or vertically. MEMORY CARD slots When positioning the console vertically, use the SCPH-10040 G vertical stand (for PlayStation “ ” product family logo (sold separately).
  • Page 6: Connecting Your Console To A Tv Set

    Connecting your console to a TV set You can connect the PlayStation 2 console to most TVs or VCRs using the supplied AV cable ® (integrated audio/video) as described below. The console can also be connected to other types of TVs using specialized cables and adaptors, which are sold separately.
  • Page 7: Connecting Digital Audio Equipment

    Connecting to a TV with component video input connectors If your monitor or projector has component video input connectors (Y, C connect your PlayStation 2 console using the ® SCPH-10100 component AV cable (for PlayStation 2) (sold separately). This will ®...
  • Page 8: Connecting Other Digital Equipment

    Connecting other digital equipment Connecting a device using the Universal Serial Bus (USB) interface The two USB connectors on the front of the console can be used to connect USB-compatible devices. Also refer to the instructions supplied with the device to be connected. USB connectors Note Not all USB-compatible products work with the...
  • Page 9 Select optional settings for the clock •Y Cb/Pb Cr/Pr : Select this when you connect Select “Clock Adjustment” using the the console to the component video input directional buttons and press the ¢ button. You connectors. can set the following optional items. •RGB : Select this when you connect the Time Format console to the RGB input connector.
  • Page 10: Playing A Game

    Playing a game Starting a game Turn on the console using the main power switch on the console rear. The 1 (standby) indicator on the console front lights up in red to indicate that the console is now in standby mode. Press the 1 (standby)/reset button.
  • Page 11 Changing from one game to Using the analog controller another (DUALSHOCK There is no need to turn off the console when •The analog controller (DUALSHOCK you want to change games. be used with PlayStation format software. Press the A (open) button. •You can switch between digital and analog The disc tray opens.
  • Page 12: Using Memory Cards

    MAGICGATE, a technology that helps protect copyrighted content through data encryption and hardware authentication. is a term of copyright protection technology developed by Sony Group. does not guarantee compatibility with other products bearing the “MagicGate” trademark. 2 Memory card (sold separately)
  • Page 13 To play the tracks in random Playing in various modes order You can change between various play modes. The default setting for “Play Mode” is Select “Play Mode” using the “Normal”, and the default for “Repeat” is directional buttons and press the “Off”.
  • Page 14: Playing A Dvd Video

    Playing a DVD video Playing a DVD video Depending on the DVD video, some operations may be different or restricted. Refer to the instructions supplied with your disc. Turn on the console using the main power switch on the console rear. The 1 (standby) indicator on the console front lights up in red to indicate that the console is now in...
  • Page 15: Using The Control Panel

    Using the Control Panel Control Panel item list You can select various playback modes and adjust DVD player settings using the on-screen Control Panel. Navigate the Control Panel using the analog controller (DUALSHOCK 2) as described ® below. DUALSHOCK ✕ button Directional SELECT a button...
  • Page 16 Playing a DVD video (continued) You can use the Control Panel to set various playback modes. Using the DVD disc menu Some DVDs allow you to select disc contents from a menu. When you play such DVDs, you can select the language for the subtitles, the language for the sound, and other options using the menu.
  • Page 17 To use Program Play with Shuffle Play or Playback in random order Repeat Play (Shuffle Play) • Program Play with Shuffle Play During playback in Program Play mode, use The console will automatically select a random the directional buttons to select the order to play titles and chapters.
  • Page 18 Playing a DVD video (continued) Notes • A-B Repeat is cleared when Repeat Play is set. • Repeat Play may not be available on some discs. • Repeat Play is cleared when: – A-B Repeat is set. – The disc tray is opened using the A button on the console front.
  • Page 19: Settings And Adjustments For The Dvd Player

    Settings and adjustments for the DVD player Notes You can use the Control Panel to navigate the • The number of angles varies depending on the disc and DVD and adjust DVD player settings. the scene. For any given scene you can choose from Note that not all functions are available on all among the angles recorded for that scene.
  • Page 20 Settings and adjustments for the DVD player (continued) Finding a particular point on a disc (Search) You can use the Search function to quickly locate a particular point on a DVD. You can search either forward or backward and can switch between 3 speeds and slow-motion playback speed.
  • Page 21 Setup display menus The Setup display menus are organized as shown below. The default settings are underlined. Screen Setup (page 22) Language Setup (pages 21-22) English TV Type Traditional Chinese Menu English French German Italian Spanish Outline Sharpening Dutch Danish Swedish Finnish Norwegian...
  • Page 22 Settings and adjustments for the DVD player (continued) x Audio Selects the language for the audio track. This setting is not available during Resume Play. • English • French • German • Italian • Spanish • Dutch • Danish • Swedish •...
  • Page 23 x Parental Control Use the directional buttons to The viewing of some DVD content may be select a number, and press the ✕ restricted based on viewer age or other factors button. in some regions. You can use the Parental Control feature to restrict the level of content Repeat this step to enter a four-digit that may be viewed on your console.
  • Page 24 Settings and adjustments for the DVD player (continued) To change your password In step 2 under “Setting Parental Control” use the directional buttons to select “Change Password”, and press the ✕ button. The screen for changing the password is displayed. Use the directional buttons to select a number, and press the ✕...
  • Page 25 x MPEG x DVD Volume Selects the MPEG AUDIO signals to be output If the audio output level of the DVD is low, you via the DIGITAL OUT (OPTICAL) connector. can turn up the volume of the DVD. DIGITAL • On : when the console is connected to audio OUT (OPTICAL) must be set to “Off”...
  • Page 26: Troubleshooting

    Troubleshooting Please go through this section if you experience difficulty in operating the PlayStation 2 console. ® • If you experience any of the following difficulties, use this troubleshooting guide to help remedy the problem before requesting repair. Should any problem persist, call the PlayStation service line ®...
  • Page 27 , Depending on the DVD, the output signal , Check that there are empty blocks/free may not comprise the entire 5.1 channel space on the memory card (8MB) (for range. It may be monaural or stereo even if PlayStation the audio track is recorded in Dolby Digital. , Try another memory card (8MB) (for PlayStation The sound comes from the center speaker...
  • Page 28: Analog Controller

    Specifications General Power requirements 220-240 V AC, 50 Hz Power consumption 50 W Console dimensions (approx.) 301 × 78 × 182 mm (w/h/d) Console weight (approx.) 2.0 kg Operating temperature 5˚C - 35˚C Laser diode properties • Material: GaAlAs • Wavelength: l=650/780 nm Inputs/outputs on the console front Controller port (2) Memory card slot (2)
  • Page 29 WARRANTY Refer to the enclosed document regarding warranty that is country/area-specific.
  • Page 30: 警告

    警告 為了避免發生火災或觸電﹐請勿讓本機淋雨或放 在潮濕的地方- 為了避免發生火災或觸電﹐請勿將倒入液體的容 器放置於主機上- 為了避免觸電﹐請勿擅自打開機殼-維修應委託 持有執照的專業技術人員進行- 注意 使用本機中的光學儀器將增加對眼睛的傷害﹐因 此不可擅自拆卸機殼-維修應委託持有執照的專 業技術人員進行-  使用 PlayStation 2 前務必閱 讀以下的注意事項 有極少部分的人﹐當看到閃光或受強烈的光線照射時會引發 癲癇或昏迷等症狀-這種人當觀看電視(包括 DVD)或觀看 如這架 PlayStation  2 等遊戲機的畫面時﹐有時會出現癲 癇發作的情形-即使至今未曾有過類似發作經驗的人﹐亦有 遭遇上述症狀之可能- 如果您過去曾經罹患癲癇﹐或是曾經有過眼花撩亂、痙攣、 癱瘓、昏迷不醒、精神錯亂或極度興奮等發作經驗的話﹐在 使用本機之前﹐請先接受醫生的診斷治療-   某些 PlayStation 規格之軟件在 PlayStation 2 主機上 執行時﹐可能會出現某些操作與使用 PlayStation ...
  • Page 31 使用類比控制器(DUALSHOCK 2)* 時的安全注  意事項 • 在使用類比控制器(DUALSHOCK 2)時﹐如果開始感覺疲  勞﹐手或手臂感覺不適或疼痛時﹐請立即停止使用主機- 光碟標誌 如果情況無好轉﹐請接受醫生的診療- • 除了用手以外﹐請勿嘗試用任何其他方法操作類比控制器 (DUALSHOCK 2)-請勿讓控制器接觸頭部、臉部或靠近  身體任何其他部位的骨骼- 光碟顏色 • 類比控制器(DUALSHOCK 2)的震動功能會加重傷勢-如  內容 果手或手臂的骨骼或關節有病狀的話﹐請勿使用震動功 能-請注意﹐有些 PlayStation 2 規格之軟件或  光碟尺寸 PlayStation 規格之軟件的初期設定將震動功能設定為  「開」-在大多數情況下﹐您可通過軟件的選項選單將 震動功能設定為「關」-使用類比控制器 (DUALSHOCK 2)操作這類軟件之前﹐請務必將震動功能  設定為「關」- 光碟標誌...
  • Page 32: 檢查包裝內容

    目錄 警告 使用前須知事項  PlayStation 2 的對應光碟 開始使用之前 開始使用之前 檢查包裝內容 各部名稱 放置主機 連接 連接 連接主機和電視機 連接搭配數碼端子的音響設備 連接其他數碼設備 使用主選單 開始玩遊戲 使用 MEMORY CARD(記憶卡) 播放音樂 CD 遊戲 音樂 CD 播放 DVD DVD 播放裝置的設定和調整 故障檢修 規格 術語解說 其他資訊 維修責任 檢查包裝內容 請檢查和確認箱子內是否具備以下物品︰  • PlayStation 2 主機...
  • Page 33: Playstation  2 的對應光碟

    各部名稱 PlayStation 2主機  前面 背面 放置主機 您可以垂直或水平放置主機-當垂直放置時﹐建 議您使用 PlayStation 2 專用直立架 SCPH-  MEMORY CARD(記憶卡) 插口 10040 G(選購品)-如果沒有 PlayStation 專用直立架﹐請如下圖所示地水平放置主機- “ ”家族企業標誌 當水平放置時﹐建議您使用 PlayStation 橫放架 SCPH-10110 G(選購品)- 1(預備)/RESET(再 啟動)按鈕和 1 顯示燈 紅外線接收器 A(打開)按鈕和 A 顯示燈 光碟托盤 水平放置 控制器端子 注意事項 •...
  • Page 34: 連接主機和電視機

    連接主機和電視機 如下所述﹐您可使用本機附屬品的 AV 連接線(音頻 視頻一體化)把 PlayStation2 主機連接到具 有影像 聲音輸入端子的電視機上-亦可利用其他特殊的連接線或轉換器(皆為選購品)﹐連接其他類型 的電視機-詳細內容請參閱以下各部分的說明- • 連接具有 S 影像輸入端子的電視機 • 連接具有影像色差輸入端子的電視機 有關上述各部分的說明均假設通過電視機揚聲器輸出聲音- 連接具有影像 聲音輸入端子的電視機時 您可使用本機附屬品的 AV 連接線(音頻 視頻一體化)把 PlayStation 子的電視機上- 連接時﹐請注意端子顏色要插入電視機上相同顏色的端子插孔﹔黃色(影像)端子插入黃色端子插孔、紅 色(右聲道)端子插入紅色端子插孔、白色(左聲道)插入白色端子插孔- 連接完畢之後 請替電視機設定正確的影像輸入頻道(參閱電視機的使用說明書)- 連接寬螢幕(長寬比 16﹕9)電視機時 請將「系統設定」選單的「螢幕尺寸」設定為「16﹕9」-關於系統設定的詳細說明﹐請參考第 8-9 頁 的說明- 如果您的電視機是單聲道 請勿連接紅色端子-若要從單聲道電視機收聽左右兩邊的聲音﹐請選用市售的雙音頻對單音頻(立體聲對單聲道)型音頻連接線 (非附屬品)- EXPANSION BAY (擴充槽)...
  • Page 35: 連接搭配數碼端子的音響設備

    連接具有影像色差輸入端子的電視機時 如果您的電視機或錄影機具備影像色差輸入端子 時﹐建議您使用 PlayStation  2 專用影像色差 連接線 SCPH-10100 G(選購品)連接電視機﹐ 如此您將可獲得更傳真的鮮明影像- 連接前 使用 PlayStation  2 專用影像色差連接線連接 電視機前﹐如果沒有先將「系統設定」選單的 「影像色差輸出」選項設定為「Y Cb/Pb Cr/ Pr」﹐電視畫面可能不正常顯示-請先使用附屬 至聲音 的 AV 連接線(音頻 視頻一體化)﹐確認「系 輸入端 子 統設定」選單的「影像色差輸出」選項是設定為 「Y Cb/Pb Cr/Pr」之後再使用 PlayStation  專用影像色差連接線進行連接- 注意事項 • PlayStation  2 主機不直接相容...
  • Page 36: 連接其他數碼設備

    連接其他數碼設備 經由 USB (Universal Serial Bus) 連接埠連接其他設備 經由 USB 連接埠﹐本機可連接其他支援 USB 的周邊設備-連接時﹐請同時參閱該產品的使用 說明書﹐正確連接- USB 連接埠 注意事項 並非所有支援 USB 的周邊設備都適用於 PlayStation 2 主  機-使用時﹐請同時參閱該機器的使用說明書- 使用主選單 第一次接通電源啟動主機時﹐螢幕上會出現提示 確認您想要檢查 拷貝 刪除的 您調整語言和時間等初期設定的畫面-這些設定 遊戲資料﹐選擇 PlayStation 以後可以通過系統設定選單進行修改-詳細內容 專用 MEMORY CARD(記憶卡) 請參考第 8-9 頁的「使用系統設定選單」- 設定完畢後﹐當您沒有放入光碟就啟動主機時﹐ (8MB) 或...
  • Page 37 選擇時鐘的顯示方式 注意事項 您可以選擇使用 RGB 輸出或影像色差輸出來播放 用方向按鈕之上下﹐選擇「調整時鐘」後按 f PlayStation 按鈕﹐您即可設定顯示方式- PlayStation 時間顯示方式 設定並無法適用到所有對應光碟-當播放 DVD(數碼影音光 碟)時會自動選擇影像色差輸出(Y, Cb/Pb, Cr/Pr)- • 12 小時制 • 24 小時制 x 遙控器 日期顯示方式 選擇使用 PlayStation • 月 日 年 購品)進行操作- • 日 月 年 • 遊戲操作功能 開:使用 DVD 遙控器操作 •...
  • Page 38: 開始玩遊戲

    開始玩遊戲 遊玩的第一步 按主機背面的 MAIN POWER(主電 源)按鈕﹐接通電源/ 當主機前面的 1(預備)顯示燈亮紅燈 時﹐代表本機目前處於預備狀態- 按 1(預備) RESET(再啟 動)按鈕/ 1(預備)顯示燈亮綠燈﹐螢幕上出現 啟動畫面- 將類比控制器(DUALSHOCK 2)插  入主機的控制器端子/ 顯示啟動畫面 沒有放入光碟就接通電源時 按 A(打開)按鈕/ 螢幕上出現 1 畫面- 打開光碟托盤- • 於出現 1 畫面後插入一片 PlayStation 規格或 PlayStation 使標籤之面朝上﹐將光碟放入托 顯示 2 或 3 畫面﹐代表您可以開始玩遊 盤/ 戲- •...
  • Page 39 長期不使用本機時 使用類比控制器(DUALSHOCK 請按主機背面的 MAIN POWER(主電源)按鈕﹐ • 可對應 PlayStation 關閉電源-並從牆壁插座拔下交流電源線- 規格的軟件-詳細請參閱遊戲說明書- • 您可以自由選擇數碼方式或類比方式進行操作- 選擇類比方式時﹐可以類比操控以下按鈕- 嘗試玩其他遊戲 PlayStation 更換光碟並不需要關閉電源- 方向按鈕 f 按鈕、a 按鈕、✕ 按鈕、s 按 鈕 左類比操作桿 右類比操作桿 L1、R1、 按 A(打開)按鈕/ L2、R2 按鈕 打開光碟托盤/ PlayStation 左類比操作桿 右類比操作桿 取出光碟/ • 您可使用震動功能- 將另一片光碟放入托盤/ 使用類比控制器(DUALSHOCK 按 A(打開)按鈕/ (選購品)...
  • Page 40: 使用 Memory Card(記憶卡

    CARD(記憶卡)(8MB) 或 MEMORY CARD(記憶 體必須容量與記憶卡內的空白記憶體容量-保存資料的記憶 卡)中的遊戲資料拷貝到別的記憶卡裡﹐或是自 體必須容量﹐都記載在各軟件的遊戲解說書等地方- 行刪除不需要的資料-不過您無法將 PlayStation 2 專用 MEMORY CARD(記憶卡)(8MB) 採用  MAGICGATE 技術﹐該技術通過數據資料加密以有助於保護已 PlayStation 獲得著作權之內容- MEMORY CARD(記憶卡)內- 是 SONY 集團開發的著作權保護技術之 您可以進入「瀏覽器」介面﹐檢查、拷貝或刪除 名稱- 遊戲資料-「瀏覽器」介面上的詳細操作方法﹐ 不保證與其他印有「MagicGate」標誌之 請參考第 8 頁「檢查 拷貝 刪除資料」的說 產品間的互換相容性- 明- 注意事項 插入記憶卡 您無法在「瀏覽器」介面上直接保存或載入遊戲資料-保存 或載入遊戲資料的方法﹐請參閱遊戲說明書- 請箭頭朝上﹐將 PlayStation 2 專用...
  • Page 41 操作 CD 播放裝置 各種播放模式 您可利用控制介面或直接按類比控制器 您可以選擇各種播放模式-「播放模式」的初期  (DUALSHOCK 2)的按鈕來操作 CD 播放裝置- 設定為「正常」﹐「重複」的初期設定為 您也可以使用 PlayStation  2 專用 DVD 遙控器 「關」- SCPH-10420 G(選購品)操作 CD 播放裝置- 進入「瀏覽器」介面﹐選擇音樂 CD 的圖標﹐按 播放光碟時﹐用方向按鈕選擇 CD 操作畫面上的 f 按鈕即可修改設定- 圖標後﹐按 ✕ 按鈕- 自己編排播放順序(編序播放) 開始播放 暫停 用方向按鈕選擇「播放模式」 停止播放 後﹐按...
  • Page 42: 播放 Dvd

    播放 DVD 播放 DVD 某些 DVD 會因為製作上的限制﹐出現操作異 常或無法操作的問題-詳細請參閱光碟的使用 說明- 按主機背面的 MAIN POWER(主電 源)按鈕﹐接通電源/ 當主機前面的 1(預備)顯示燈亮紅燈 時﹐表示本機目前處於預備狀態- 按 1(預備) RESET(再啟 動)按鈕/ 1(預備)顯示燈亮綠燈﹐螢幕上出現 啟動畫面- 按 A(打開)按鈕/ 打開光碟托盤- 使標籤之面朝上(播放之面朝 下)﹐將光碟放入托盤/ 按 A(打開)按鈕/ 關閉托盤﹐開始播放- 注意事項 • PlayStation 2 主機具備多種先進播放功能﹐使影音質量  更趨完美-選用這些功能時需先調整設定﹐詳細內容請參 閱第 20-26 頁- •...
  • Page 43 使用控制介面 控制介面項目一覽表 利用畫面上的控制介面﹐您可選擇各種播放模 式﹐還能調整 DVD 播放裝置的各項設定- 請使用如下所示的類比控制器(DUALSHOCK 2)  操作控制介面- DUALSHOCK ✕ 按鈕 方向按鈕 SELECT(選 a 按鈕 擇)按鈕 顯示或關閉控制介面:SELECT(選擇)按鈕 決定 :✕ 按鈕 解除 :a 按鈕 選擇 :方向按鈕之上下左右按鈕 按 SELECT(選擇)按鈕/ 顯示 DVD 的光碟選單-選單內容因光碟而 異- 螢幕上顯示控制介面- 顯示 DVD 的光碟選單-選單內容因光碟而 異- 3 O Return(返回)(第 16 頁) 您可返回選單的前一個畫面- 用方向按鈕選擇功能/ 顯示或變更...
  • Page 44 播放 DVD(續上頁) 您可利用控制介面設定各種播放模式- 使用 DVD 光碟選單 您可開啟選單選擇某些 DVD 的光碟收錄內容-在 播放這類 DVD 時﹐您可利用選單指定播放項目、 字幕語言、聲音語言以及其他選項- 用方向按鈕選擇 (選單)或 (頂部選單)﹐按 ✕ 按鈕決 定/ 螢幕上顯示 DVD 選單﹐但選單內容可能 因 DVD 而異- 用方向按鈕選擇您想要的項目後 按 ✕ 按鈕/ 返回到前一個畫面 用方向按鈕選擇 O(返回)後﹐按 ✕ 按鈕執 行- 某些 DVD 可能不支援這項功能- 使用類比控制器(DUALSHOCK  按...
  • Page 45 在停止播放時設定隨機播放 以任意順序播放(隨機播放) 使用方向按鈕選擇 主機會自動依任意設定的隨機順序進行播放-使 按 ✕ 按鈕選擇想要的隨機播放模式後﹐再使用 用隨機播放時﹐每次的播放順序都會不同- 方向按鈕選擇 N(播放)圖標後﹐按 ✕ 按鈕﹐ 在播放過程中用方向按鈕選擇 (隨機播 即會開始隨機播放- 放)圖標後﹐按 ✕ 按鈕- 每按一次 ✕ 按鈕﹐都會依以下順序﹐於螢幕上 注意事項 顯示隨機播放模式-於選擇隨機播放模式後﹐即 • 開始隨機播放後﹐將自動解除 A-B 重複播放- 會開始隨機播放- • 某些 DVD 可能不支援隨機播放功能- • 出現下列情形時﹐將自動解除隨機播放- – 設定 A-B 重複播放- 標題隨機播放 – 螢幕上顯示 DVD 光碟選單- (以任意順序播放標題)...
  • Page 46: Dvd 播放裝置的設定和調整

    播放 DVD(續上頁) 播放 DVD-RW 時選擇原作品 播 放目錄 本機可以播放 DVD-RW(VR 模式)中﹐用 DVD 播 放機錄製的原創作品內容﹐並能播放在編輯原創 作品內容後而製造的播放目錄內容-當使用此類 光碟時﹐您可事先選擇想要播放的標題類型- 請注意﹐您無法利用本機錄製或編輯播放內容- 另外﹐在選擇重續播放時﹐將無法使用或設定本 功能- 停止播放後﹐用方向按鈕選擇 (原作品 播放目錄)圖標後﹐按 ✕ 按鈕- 每按一次 ✕ 按鈕﹐都將切換選擇原作品或播放 目錄- • 原作品:播放原先錄製的內容- • 播放目錄:播放經編輯的內容- 注意事項 • 此選項的初期設定為播放目錄- • 如果光碟未錄製播放目錄﹐則將播放原作品內容-您無法 選擇播放目錄- • 以 VR 模式錄製的 DVD-RW 光碟﹐您無法選擇相反方向的 慢動作播放- •...
  • Page 47 顯示播放資訊 發現光碟的特殊場景(尋找) 您可隨時要求螢幕上顯示目前的標題號碼或章號 利用尋找功能可以快速尋找 DVD 的特殊場景- 碼﹐以及光碟的已經播放時間或剩餘播放時間- 您可透過前進尋找或後退尋找﹐運用三種尋找速 編序播放或隨機播放等播放模式的資訊﹐亦會於 度與慢動作播放等播放速度﹐掃描影像特定場 您選擇設定後﹐顯示於螢幕右上方- 景-於關閉控制介面後﹐則可利用類比控制器 (DUALSHOCK2)使用這項功能- 播放光碟或暫停播放時﹐用方向按鈕選擇 (時間顯示)圖標後﹐按 ✕ 按鈕- 播放時﹐用方向按鈕選擇 每按一次 ✕ 按鈕﹐顯示內容都將如下改變- 找、快退)或 圖標後﹐按 ✕ 按鈕開始尋找/ 標題 × 章 × (標題號碼和章號碼) 在尋找時﹐按方向按鈕可以改變 影像的掃描速度/ 標題 × 章 × C XX:XX:XX (目前章的已經播放時間) 按住 ✕ 按鈕的同時按方向按鈕﹐影像 的掃描速度都將如下改變:...
  • Page 48 DVD 播放裝置的設定和調整(續上頁) 設定顯示選單 設定顯示選單的構成如下所示-購買時的初期設定標有下線- 語言設定(第 20-21 頁) 畫面顯示語言 英文 繁體中文 選單語言 英文 法文 德文 義大利文 西班牙文 荷蘭文 丹麥文 瑞典文 芬蘭文 挪威文 葡萄牙文 俄文 中文 日文 韓文 語言一覽 , 與選單相同 聲音語言 字幕語言 英文 法文 德文 義大利文 西班牙文 荷蘭文 丹麥文 瑞典文 芬蘭文 挪威文...
  • Page 49 x Audio(聲音語言) 設定電視機的螢幕(畫面設定) 選擇聲音軌跡語言- 您可設定所連接的電視機的縱橫比及其它顯示選 在選擇重續播放時﹐將無法使用或設定本功能- 項-購買時的初期設定標有下線- • 英文 • 法文 從設定顯示選單中選擇 • 德文 細內容請參閱第 19 頁的「使用設定顯示」- • 義大利文 • 西班牙文 x 電視機形式 • 荷蘭文 設定您所連接的電視機形式- • 丹麥文 在選擇重續播放時﹐將無法使用或設定本功能- • 瑞典文 • 16︰9︰當您連接一台寬螢幕電視或具備寬螢幕 • 芬蘭文 模式的普通電視機時的標準設定- • 挪威文 • 4:3 信箱形式:使用普通電視機時的標準設 •...
  • Page 50 DVD 播放裝置的設定和調整(續上頁) 設定視聽年齡限制 從設定顯示選單中選擇 (個人設定)圖標- 用方向按鈕選擇「視聽年齡限 制」後﹐按 ✕ 按鈕/ 如果尚未登錄密碼 顯示登錄密碼的畫面- 如果已經登錄了密碼 顯示確認密碼的畫面- 用方向按鈕選擇一個數字後﹐按 ✕ 按鈕/ 重複此過程﹐輸入一個四位數密碼- 出現設定地區、視聽年齡限制等級、以 及改變密碼的畫面- 用方向按鈕選擇「地區」後﹐按 用方向按鈕選擇一個限制播放的 ✕ 按鈕/ 等級後﹐按 ✕ 按鈕/ 出現地區一覽表- 視聽年齡限制設定完成- 數值越小﹐代表等級越嚴格- 用方向按鈕選擇一個地區作為設 地區代碼一覽表 定視聽年齡限制等級的標準後﹐ 按 ✕ 按鈕/ 地區 選擇「其他」時﹐請參照右表的「地區 英國 代碼一覽表」來選擇地區代碼- 義大利 用方向按鈕選擇第一個字母後﹐按右方...
  • Page 51 如果忘記了密碼 設定聲音選項(聲音設定) 您可根據播放條件或使用的裝置調整聲音設定- 出現確認密碼的畫面時按 SELECT 購買時的初期設定標有下線-詳細內容請參閱第 (選擇)按鈕/ 19 頁的「使用設定顯示」- 出現刪除密碼的畫面- 從設定顯示選單中選擇 用方向按鈕選擇一個數字後﹐按 ✕ 按鈕/ x 聲音數碼輸出 使用數碼輸出光纖連接線(選購品)將下列音響 重複此過程來輸入四位數號碼 設備連接至 PlayStation 「7444」-如此﹐原先的舊密碼就會被 OUT (OPTICAL)(數碼輸出光纖)端子時﹐您可改 自動刪除-並顯示登錄新密碼的畫面- 變音頻信號的輸出方式- 按照「設定視聽年齡限制」步驟 • 具備數碼輸出端子的數碼接收器(擴大機)- • 內建 Dolby Digital、DTS 或 MPEG 解碼器的 2 的方法登錄一個新密碼/ 音響設備- • DAT(數碼音頻錄音帶)或 MD(迷你光碟)唱 注意事項...
  • Page 52 DVD 播放裝置的設定和調整(續上頁) x DVD 音量 假如 DVD 音量的輸出功率過低﹐您可以選擇調整 DVD 音量-改變設定時必須先將「DIGITAL OUT (OPTICAL)」(數碼輸出光纖)設定為「關」- • +2︰調高音量-(最大音量) • +1︰調高音量- • 標準:正常音量-通常選擇此項設定- 注意事項 某些 DVD 在選擇「+1」、「+2」後﹐會出現音質失真的現 象-若出現這種情況﹐請選擇「標準」設定- 警告 如果您將音量調得過高﹐可能會傷害耳朵或損壞接收器 (放大機)- 本機採用的著作權保護技術乃是受美國專利權及 智慧財產權(知識產權)等相關法律保護﹐由 Macrovision 和其他著作權人共同保有之認證技 術-非經 Macrovision 正式許可﹐禁止擅自使 用-未獲得 Macrovision 特殊授權﹐嚴禁在一般 家庭等視聽觀賞用途以外的地方使用-禁止自行 拆卸或分解本機-...
  • Page 53: 故障檢修

    故障檢修 , 光碟未正確放入托盤- , 主機是否被設定在暫停狀態- , 嘗試用其他 AV 連接線連接- , 未使用支援逐行掃描的電視機﹐或者使用非 在使用 PlayStation 2 主機  PlayStation 時﹐如果操作上遭遇到困難﹐ 「Progressive」(逐行掃描)設定為「開」 了- 請閱讀下面的文章﹐以便找到 請不要打開光碟托盤或退出 DVD-在 DVD 放 問題的可能原因/ 入主機內的狀態下﹐按主機前面的 1(預 備) RESET(再啟動)按鈕﹐然後按住類比 控制器(DUALSHOCK 1 如果您遭遇到下列困難﹐請閱讀以下的故 鈕﹐直至顯示 DVD 畫面-若 DVD 開始播放﹐ 障檢修指南﹐以方便您解決問題或恢復正 則代表「Progressive」將被設定為「關」﹐ 常操作/如果無法解決問題﹐請就近與保...
  • Page 54: 規格

    故障檢修(續上頁) 只能聽到中置喇叭的聲音 , 某些光碟的聲音可能只能從中置喇叭發出- 操作 無法操縱控制器 , 確認控制器是否正確連接在主機上- , 確認類比控制器(DUALSHOCK 2)的操作模式  是否已配合軟件正確設定-(參考第 11 頁 的說明) , 嘗試用其他控制器重新操作- 無法啟動軟件 , 確認您放入的是一片本機可以對應的光碟- (請參考第 3 頁的說明) , 確認放入光碟時﹐標籤之面是否朝上(播放面 朝下)- , 光碟未正確放入托盤- , 是否有結露現象-(參考第 2 頁的說明) , 擦拭光碟- , 嘗試啟動其他光碟- , 確認是否已對正在播放的 DVD-R 或 DVD-RW 進行了最終化操作- 無法將遊戲資料保存到...
  • Page 55: 術語解說

    術語解說 章(參考第 19 頁) 另外﹐DVD 還具備多重角度(多角度)、多重語 DVD 中所使用的﹐電影或音樂的收錄單位﹐可收 言及視聽年齡限制等多樣的先進功能- 錄時間比「標題」短-一個「標題」大致被分為 數個「章」-每個章都有所謂的「章號碼」﹐以 DVD-RW 方便您選擇想要播放的章- DVD-RW 是和 DVD VIDEO 光碟尺寸相同的可讀寫 光碟-DVD-RW 能以兩種模式錄製:VR 模式和視 Dolby Digital(杜比數碼 AC-3;杜比數位 AC- 頻模式- 3)(參考第 7 頁、第 23 頁) • 視頻模式-兼容 DVD-VIDEO 規格﹐經最終化處 理後﹐大多數的 DVD 播放機都可播放其收錄之 由杜比實驗室開發的數碼聲音壓縮技術-此技術 內容。但以 VR 模式錄製的 DVD-RW 則只能使 支援...
  • Page 56 “ ”, “PlayStation”, “DUALSHOCK“ and “ ” are registered trademarks and “ ” is a trademark of Sony Computer Entertainment Inc. “SONY” is a registered trademark and “ ” and are trademarks of Sony Corporation. “ ”、“PlayStation”、“DUALSHOCK”和“ ”為 Sony Computer Entertainment Inc. 之註冊商標- “...

Table of Contents