Part Names - Sony PS3 CECH-2001A Instruction Manual

Part names

System front / rear
WLAN access indicator
HDD access indicator
USB connectors
Notice
Do not place the system in an area subject to excessive dust or cigarette
smoke. Dust build-up or cigarette smoke residue on the internal components
(such as the lens) may cause the system to malfunction.
Hint
When placing the system in a vertical position, use the vertical stand (sold
separately).
14
Disc slot
Power button
Eject button
LAN connector
HDMI OUT connector
Vent
AC IN connector
AV MULTI OUT connector
DIGITAL OUT (OPTICAL)
connector
DUALSHOCK 3 Wireless Controller
®
Port indicators
L2 button
L1 button
Directional
buttons
Left stick/
L3 button*
SELECT button
* The L3 and R3 buttons function when the sticks are pressed.
Notice
Some PlayStation and PlayStation
®
controller (DUALSHOCK ) and analog controller (DUALSHOCK
®
compatible with the PS3™ system. For details, visit
http://www.us.playstation.com.
Caution
 Do not use the system in a closed cabinet or other locations where heat may
build up. Doing so may cause the system to overheat and may lead to fire,
injury or malfunction.
 If the system's internal temperature becomes elevated, the power indicator
will flash alternately in red and green. In this case, turn off the system
( page 23) and leave it unused for a while. After the system cools down,
move it to a location with good ventilation, and then resume use.
USB connector
R2 button
R1 button
button
button
button
button
Right stick/
R3 button*
START button
PS button
2 peripherals such as the analog
®
2) are not
®