Remove The Wireless Association - Technotherm TPF-EcoRF Manual

17. Remove the wireless association.

❶ The thermostat must be in
shutdown mode.
Press and hold the 2nd button from
the left for 5 seconds.
The screen displays the thermostat version.
❷ Press and hold the 2nd button from
the left for 5 seconds again.
The screen displays the rF01 menu.
❸ Press + to display rF03,
then press OK.
The number of receivers found and
associated is displayed in the centre of
the screen.
❹ Press OK for 5 seconds.
The thermostat removes the wireless
associations until "00" is displayed.
1
>5s
- 56 - - 56 -
2
>5s
3
4
>5s