Table of Contents
Advertisement
11. External override
The external override is used to
suspend the automatic operation of
the thermostat from another wireless
transmitter
allowing this function.
For an external override, the symbol
and the new override value are
displayed.
Thermostat follows the parameters
demanded by the external transmitter.
During the external override, if the symbol
appear on the thermostat screen, press the i button or turn the
selection knob to refresh the display.
12. Anticipation
You have programmed your Comfort and
Economy periods.
Anticipation (configuration menus CF28
and CF29) enables you to obtain the
required Comfort temperature directly at the
programmed time.
Example: you programmed Comfort for 6pm, but the anticipation
function starts to raise the temperature beforehand (e.g. 4.30pm).
In AUTO mode, the current anticipation is shown by the flashing
symbol.
- 51 -
- 51 -
does not
EN
Advertisement
Table of Contents
