ComAp InteliMains NT IM-NT-BB Reference Manual page 306

Related FW standard v3.1.0
Description Bus voltage in phase L3.
N :
OTE
The ratio between the voltage measured at the input terminals and the
displayed voltage is adjusted by the setpoint
12.1.2.5 Value: Bus V
Group Bus values
Units V
Related FW standard v3.1.0
Description Bus voltage. Average from all three phases.
N :
OTE
The ratio between the voltage measured at the input terminals and the
displayed voltage is adjusted by the setpoint
12.1.2.6 Value: Bus V L1-L2
Group Bus values
Units V
Related FW standard v3.1.0
Description Bus voltage phase L1 to L2.
12.1.2.7 Value: Bus V L2-L3
Group Bus values
Units V
Related FW standard v3.1.0
Description Bus voltage phase L2 to L3.
NT
InteliMains , SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
Bus VT ratio.
Bus VT ratio.
306