Learning Function Of Steering Remote - JVC KW-M150BT Instruction Manual

External Components
Ñ To adjust the parking guidelines
✎
NOTE
• Install the rear view camera in the appropriate
position according to the instruction manual
supplied with the rear view camera.
• When adjusting the parking guidelines, make sure
to apply the parking brake to prevent the car from
moving.
1
Press the < > button.
2
Touch [Setting].
3
Touch [System].
4
Touch [T] or [U] of [Parking Guidelines] and set
to [ON].
5
Touch [Guidelines SETUP].
6
Adjust the parking guidelines by selecting the
[ ] mark.
7
Adjusting the position of the selected mark.
C
Make sure that lines A and B are horizontally
parallel, and that lines C and D are of the same
length.
✎
NOTE
• Touch [Initialize] and then touch [Yes] to set all the
marks to their initial default position.
A
D
B
Learning function of steering
remote
This function is available only when your vehicle
is equipped with the electrical steering remote
controller.
1
Press the < > button.
2
Touch [Setting].
3
Touch [System].
4
Touch [Steering Remote].
5
Touch the function you want to set.
6
Press and hold the steering remote controller
button.
✎
NOTE
• You can have the unit learned all buttons at a time.
In that case, press the all buttons one at a time and
after pressing all of them, touch [6] in Steering
Remote Controller Setting screen.
7
Repeat steps 5 and 6 as necessary.
8
Touch [6].
✎
NOTE
• Touch [Initialize] and then touch [Yes] to set all the
settings to the initial default settings.
English |
13