Remote Controller (Rm-Rk240) - JVC KW-AVX706 Instructions Manual

Basic operations —
Installing the lithium coin battery (CR2025)
Before using the remote controller:
• Aim the remote controller directly at the
remote sensor on the unit.
• DO NOT expose the remote sensor to bright
light (direct sunlight or artificial lighting).
Warning:
To prevent accidents and damage
• Do not install any battery other than
CR2025 or its equivalent.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
• Do not leave the battery with other
metallic materials.
• Do not poke the battery with tweezers or
similar tools.
• Wrap the battery with tape and insulate
when throwing away or saving it.
IMPORTANT:
If Dual Zone is activated (☞ page 24),
the remote controller functions only for
operating the DVD/CD player.

Remote controller (RM-RK240)

MONITOR CONTROL
1
Monitor control buttons
• Used for a JVC monitor—KV-MR9010,
DVD/RECEIVER CONTROL
2
• Turns on the power.
• Attenuates the sound if the power is on.
• Turns off the power if pressed and held
3
Selects the source.
4
Selects the FM/AM bands.
5
Changes the aspect ratio of the playback
pictures.
6
Activates or deactivates Dual Zone.
7
Adjusts the volume level.
• Also functions as 2nd VOL button when
8*
1
• DVD: Shows the disc menu.
• VCD: Resumes PBC playback
8
Main elements and features
EXTRA MONITOR CONTROL
MODE ASPECT
DVD / RECEIVER CONTROL
ZOOM
ATT
+10
SOURCE
–100
BAND
–10
DUAL ASPECT
1 2
DISC +
VOL
TOP M
4 5
2nd VOL
ENTER
7 8
DISC –
SETUP
0
SHIFT
RM-RK240
or KV-MH6510.
(while the power is on).
pressed with SHIFT button (☞ page 24).
(☞page 19).
MENU
+100
DIRECT
OSD
3
MENU
6
9
RETURN
SURROUND