WilTec 51743 Operation Manual

Download this manual

Operation Manual

ARTICEL 51743

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments, illustrations, functioning steps and technical data can differ

insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities please contact us.

Seite 6

http://www.WilTec.de

http://www.aoyue.eu

Version 5.2017

http://www.teichtip.de

Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 6 http://www.WilTec.de http://www.aoyue.eu Version 5.2017...
Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
Page 3 2. In the first step, install the empty rim without tires on the balancer. When the wheel is centered on the spindle, fix the screws in the cones with a 3mm hex wrench. Check the tight fit. © by WilTec Wildanger Technik GmbH Seite 8 http://www.WilTec.de...
Page 4 For an empty rim, a maximum of 30 grams of weight should be required. If you need more weight, you should check the rim and the attachments for damage. Check the tread. , © by WilTec Wildanger Technik GmbH Seite 9 http://www.WilTec.de http://www.aoyue.eu...
Page 5 If a total weight of more than 50 grams is required, then you should reclaim the tire. © by WilTec Wildanger Technik GmbH Seite 10 http://www.WilTec.de http://www.aoyue.eu...