1.4.7 Pictograms and safety instructions
Pictograms and safety instructions are compulsory on the rail-cutting machine, and must be placed at the position indicated.
If any of them be missing or damaged, a new label must be ordered immediately and be installed in the position provided for.
If any part holding a label has been replaced, make sure that a new label has been put in place on the replacement part.
Reference: N° 75017
Position: Riveted on the disc
guard
1.4
Reference: N° 75021_A (yellow background)
Position: Sticked to the tank housing. Below the
combined start and stop lever.
Reference: N° 0000 967 3759
Position: Glued to the filter cover
MTZ_Gb_00289_070525.doc
Reference: N° 75022_A (yellow background)
Position: Sticked to the cutting machine housing,
under the filler cap.
1.4