Table of Contents
Advertisement
Product Manual CWC-LOK-LID
5. Installation and Commissioning
5.1 Package Contents
Before you begin the installation, make sure that you have the following items:
✓ 1 Product Manual.
✓ 1 Lockable Lid assembly, Model No. CWC-LOK-LID.
✓ 6 Metre Length of Hygiene sleeve (for 10 replacements of 600mm each).
✓ 1 plastic bag containing 10 bands (Cable ties).
*
✓
Torque Wrench & 6mm A/F bit capable of measuring up to 14Nm torque.
*
NOTE: Accessory: Torque Wrench Kit, part no. DL7543 may be supplied. This item is
ordered separately, contact the Wallgate sales desk for more information.
5.2 Lockable Lid Preparation
5.2.1
Pre-installation guidelines
WARNING! When handling the Lockable Lid assembly it is advisable to practice good
hygiene & infection control & suitable PPE should be used.
1. Prior to fitting Lockable Lid assembly to the WC ,the 'J' bolt protruding below the Lid
must be unlocked to its fullest out end stop position. By fully unscrewing the captive
bolt CCW.
2. A 60cm length of hygiene sleeve must be fully fitted & secured over the 'J' bolt in
accordance with instructions Figs 1 & 2.
8
Wallgate
2019
|Revision 5.0
Advertisement
Table of Contents
