Step 3 : Connecting the VCR
If your TV has a Scart (EURO-AV) connector, see page 13.
If your TV does not have a Scart (EURO-AV) connector
: Signal flow
1
2
Note
• When you connect the VCR and your TV only with an aerial cable, you have to
tune your TV to the VCR (see page 14).
12
Connecting the VCR
IN FRONT ANT.
AERIAL IN
Disconnect the aerial cable from
your TV and connect it to IN
FRONT ANT. on the rear panel of
the VCR.
Connect OUT TO TV of the VCR
and the aerial input of your TV
using the supplied aerial cable.
OUT TO TV
Aerial cable (supplied)