Sony SLV-SE210D Operating Instructions Manual page 34

To check the remaining time
Press
check the remaining time. Each time you press COUNTER/REMAIN, the
time counter and the remaining time appear alternately.
In order to get an accurate remaining time indication, be sure TAPE
SELECT in the USER SET menu is set according to the tape type you use
(see page 48).
To watch another TV programme while recording
1
Press t TV/VIDEO to turn off the VCR indicator in the display
window.
2
Select another programme position on the TV.
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.
Tips
• To select a programme position, you can use the programme number buttons on the
remote commander. For two-digit numbers, press the - (ten's digit) button
followed by the programme number buttons.
• If you connect additional equipment to a an input connector, you can select the
input signal using the INPUT SELECT or PROG +/– buttons.
• The
about the tape, but the information won't be recorded on the tape.
• If you don't want to watch TV while recording, you can turn off the TV. When
using a decoder, make sure to leave it on.
34
Recording TV programmes
DISPLAY. With the display on, press COUNTER/REMAIN to
0 : 0 0 : 2 2
Time counter
DISPLAY information appears on the TV screen indicating information
REMAIN
1 :
Remaining time
Safety tab
4 6